The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old August 8, 2013, 04:32 PM   #1
royboy
Junior Member
 
Join Date: April 1, 2012
Posts: 11
Re-lined my Winchester 1890/1906 .22

After a lot of research I just finished rebuilding my uncle's old Winchester model 1890/1906. The 1890 & 1906 parts are almost interchangeable so there lots of parts online. After re-lining the barrel, I replaced the receiver, the bolt, firing pin, main spring, hammer, trigger, inner magazine tube, the front magazine tube hanger and numerous other small parts. I also had to repair a large crack in the butt stock. Tried sighting it in but it was shooting 3"-4" to the right. I tapped the f/sight until it fell off. After more research it was determined that the barrel needed to be straightened. With my friend holding the barrel on a couple of blocks on the anvil I took an 8# sledge and hit it until it was zeroed in. It's UGLY but that's the way I got it and it is now a tack driver.
royboy is offline  
Old August 8, 2013, 08:09 PM   #2
iraiam
Senior Member
 
Join Date: September 6, 2012
Location: Lakewood, CO
Posts: 873
I always refer to an 8# sledge as a fine adjustment tool
__________________
NRA Lifetime Member Since 1999

"I ask, sir, what is the militia? It is the whole people except for a few public officials." George Mason
iraiam is offline  
Old August 8, 2013, 11:04 PM   #3
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,835
Doesn't sound like much is left of the original gun.

Jim
__________________
Jim K
James K is offline  
Old August 9, 2013, 05:38 AM   #4
Old Stony
Senior Member
 
Join Date: May 31, 2013
Location: East Texas
Posts: 658
I once did the same sort of thing with a model 90 I acquired. Shooting it off of a picnic bench I found it could not be sighted in. I put part of the barrel in between the boards of the bench and applied a little pressure several times along the barrel and it sighted in just fine afterward. Those barrels are more pliable than some people think.
Old Stony is offline  
Old August 13, 2013, 04:38 PM   #5
oldgunsmith
Senior Member
 
Join Date: January 9, 2013
Posts: 278
The fork of a tree works if there's not a bench around. Works on shotguns, too.
oldgunsmith is offline  
Old August 18, 2013, 12:26 AM   #6
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,505
Quote:
Doesn't sound like much is left of the original gun.
Sounds like the apocryphal "jacked up the front sight and changed everything under it".
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old August 18, 2013, 12:33 AM   #7
FrankenMauser
Senior Member
 
Join Date: August 25, 2008
Location: 1B ID
Posts: 6,922
Quote:
Sounds like the apocryphal "jacked up the front sight and changed everything under it".
Yea. It reminds me a bit of a Savage 99 "restoration" I saw on a now-defunct local forum.

The guy wanted to save his grandfather's 1918 Savage 99 that had been hidden in a chicken house for 30+ years, but it was in really poor shape (not surprisingly).

3 parts guns, many shipments from Numrich, and an astronomical gunsmith bill later....
He had a cut-down original barrel, and buttplate, with everything in between being replaced; and the entire rifle refinished/reblued.


It was a pretty big deviation from what most of us would take on for a "restoration" or even a 'rebuild'.

BUT .... He was happy with it.
__________________
"Such is the strange way that man works -- first he virtually destroys a species and then does everything in his power to restore it."
FrankenMauser is offline  
Old August 24, 2013, 08:54 PM   #8
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,799
Sounds like Daniel Boone's original tomahawk. The handle has only been replaced three times and the head twice.
Hawg is online now  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:39 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07494 seconds with 7 queries