The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools
Old July 9, 2013, 08:07 PM   #1
skoal3
Member
 
Join Date: July 9, 2013
Posts: 27
Thompson Center Dimension

Just bought a new dimension in 7mm08 and I've been having a few issues so I did a search on here and found a couple threads from 2011 with basically the same problems I'm having only in the Venture model. Just wondering if anyone else is having these problems or any ideas on how to fix them without sending the rifle back, kind of sounds like a nightmare. When I first got it the bolt was incredibly stiff to cock, couldn't do it with the rifle shouldered and it almost took 3 hands. I worked the bolt for an hour or so and it loosened up but after putting roughly 50 rounds through it I've had two, towards the end of the 50 rounds, back to back misfires, the firing pin struck the primer on the first one and nothing on the second one. Any ideas?
skoal3 is offline  
Old July 11, 2013, 09:51 PM   #2
reynolds357
Senior Member
 
Join Date: December 10, 2012
Posts: 2,498
Send it back. I sent my Venture back and the round trip took less than a week, only only cost me a few pieces of tape to seal the shipping box with.
reynolds357 is offline  
Old July 13, 2013, 09:00 PM   #3
skoal3
Member
 
Join Date: July 9, 2013
Posts: 27
That would be nice if it went that quick, I've read other posts of it having to back time after time and taking weeks or even months, that makes me nervous. I took it out and shot it again today and around 40 rounds went off without a problem. Hopefully it stays that way.
skoal3 is offline  
Reply

Tags
bolt , dimension , misfire , t/c

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06038 seconds with 9 queries