The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 15, 2013, 07:18 PM   #1
30-378
Junior Member
 
Join Date: June 12, 2013
Posts: 6
Another stupid question

I posted about the set up that we had bought and know trying to put a order together for some dies and the charge master but was wondering if I would be able to use the lock ring and that accurately sets the die back next reloading session or not I was told to get the hornady locking dies and agree but there not in stock and would like to get only the things in stock on this order.


And I know I need to measure the rounds each time I change the dies but if the locking dies do any better or eliminate any steps.
30-378 is offline  
Old June 15, 2013, 09:41 PM   #2
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,247
With the exception of the Lee locking rings, which you set each time, standard lock rings have a set screw or a cross-bolt screw to fix their positions on the die. This is intended to relocate them to the same place each time. However, you want to check a test round with them each time to be sure you didn't get them tightened a little differently than at the previous session. After while you'll get the feel of it.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Old June 16, 2013, 09:24 AM   #3
David Bachelder
Senior Member
 
Join Date: August 23, 2011
Location: Trinity, Texas
Posts: 631
Rockchucker wasn't it?

Look at the Hornady Lock and Load press adapter and die bushings. They will save you a ton of time.
__________________
David Bachelder
Trinity, Texas
I load, 9mm Luger, 38 and 40 S&W, 38 Special, 357Magnum, 45ACP, 45 Colt, 223, 300 AAC, 243 and 30-06
David Bachelder is offline  
Old June 16, 2013, 09:28 AM   #4
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 11,084
That is what the lock ring is for.
If you are loading match rifle ammunition, you will want to double check your product, but the lock ring is going to get you back where you were or very close.
Jim Watson is offline  
Old June 16, 2013, 11:40 AM   #5
30-378
Junior Member
 
Join Date: June 12, 2013
Posts: 6
Ok so thats good to know for now because there on back order and I will defanantly be wanting them in the future thanks
30-378 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06994 seconds with 9 queries