The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 14, 2013, 03:40 PM   #1
brassbullets1
Junior Member
 
Join Date: August 22, 2011
Location: ky
Posts: 11
Starting load for m1 garand using imr-4895

I am going to load 150 gr and 163 gr for my M1 garand , ( 30/06) anybody have a starting load using IMR-4895 for both bullets that is safe for oper. rod. thanks for all info
brassbullets1 is offline  
Old June 14, 2013, 04:26 PM   #2
Slamfire
Senior Member
 
Join Date: May 27, 2007
Posts: 4,130
My developed loads were for a 150 SMK 47.5 grains IMR 4895 and for a 168 SMK 47.0 grains IMR 4895.

With either bullet start at 45.0 grains and stop where I stopped.
__________________
If I'm not shooting, I'm reloading.
Slamfire is offline  
Old June 14, 2013, 04:33 PM   #3
mehavey
Senior Member
 
Join Date: June 17, 2010
Location: Virginia
Posts: 2,945
You need to bookmark this page:

http://masterpostemple.bravepages.com/M1load.htm
mehavey is offline  
Old June 15, 2013, 08:15 AM   #4
brassbullets1
Junior Member
 
Join Date: August 22, 2011
Location: ky
Posts: 11
thanks for info
brassbullets1 is offline  
Old June 16, 2013, 01:31 PM   #5
schill32
Member
 
Join Date: December 5, 2012
Posts: 22
imr 4895 m1

I reload for the m1 garand and use imr 4895 with nosler 168 grn custom competition and my load is
44.5 grns imr 4895 and my aol is 3725
and getting good results getting all 10 shots in a 6" black circle at @100 yrds but still working on it good luck
steve
schill32 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:10 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06745 seconds with 7 queries