The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools
Old June 14, 2013, 11:30 AM   #1
jcleaner
Junior Member
 
Join Date: June 14, 2013
Posts: 2
legal or not?

Ok, first I'm a noob so be gentle. Building my first ar15 (rifle not pistol) and I bought what was supposed to be a 16" barrel (private sale), but when it arrived it was a 10" barrel with a 6" flash suppressor! So, 2 questions;
1. Is this make it a legal (16") barrel?
2. Second, I measured the barrel from the rear of the delta ring to barrel end, and it actually measured 15 3/4". Did I measure this correctly?
jcleaner is offline  
Old June 14, 2013, 11:37 AM   #2
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,738
1) if the flash suppressor is permanently attached (welded for sure, possibly certain kinds of staked/pinned, I'm not sure on that) it is legally 16"

2)the measurement is from the breach face (bolt).

From a ballistics perspective (energy) its a 10" barrel though. I'd be most upset that the actual "barrel" wasn't the 16" I paid for, assuming it was t your screw up for ordering the wrong thing.

Last edited by Brian Pfleuger; June 14, 2013 at 11:52 AM.
Brian Pfleuger is offline  
Old June 14, 2013, 12:24 PM   #3
UtopiaTexasG19
Senior Member
 
Join Date: July 3, 2011
Location: S.E. Texas Gulf Coast
Posts: 743
I would never buy a barrel unless I saw it first or received some sort of picture. I know that would not tell you how worn the inside was but it would have been a red flag to you about the lenght.
UtopiaTexasG19 is offline  
Old June 14, 2013, 11:25 PM   #4
jcleaner
Junior Member
 
Join Date: June 14, 2013
Posts: 2
leagl

yeah, I know, really dumb. just got anxious but learned my lesson. thanks for the help guys.
jcleaner is offline  
Old June 15, 2013, 09:19 AM   #5
BPowderkeg
Junior member
 
Join Date: September 27, 2011
Posts: 382
if possible, return it and buy a regular 16" heavy barrel with 1-7 or 1-9 twist.
BPowderkeg is offline  
Old June 15, 2013, 09:50 AM   #6
Ibmikey
Senior Member
 
Join Date: June 1, 2013
Location: Medical Lake Wa.
Posts: 512
Midway has a heavy 16" Model 1 (Shaw barrel) for $150. I built a rifle with one and it is a tack driver.
Ibmikey is online now  
Old June 15, 2013, 10:38 AM   #7
Gunplummer
Senior Member
 
Join Date: March 11, 2010
Location: South East Pa.
Posts: 1,446
I have a barrel like you described on mine for years. Look on the flash suppressor for a small silver dot about 1/16 big down where the barrel starts. This is silver solder or braze and is legal. There were hundreds of these barrels produced and I believe they are still available through "The Gun Parts Corporation".
Gunplummer is offline  
Old June 18, 2013, 10:25 PM   #8
Yung.gunr
Senior Member
 
Join Date: November 11, 2010
Location: Phoenix area
Posts: 1,366
I've never understood the point of getting 10" barrel and tacking the fake can on there.

If you don't want to pony up for the SBR or get the pistol then just stick with the 16" barrel. You have all that length with none of the benefits.
Yung.gunr is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:48 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.13647 seconds with 9 queries