The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools
Old June 14, 2013, 07:24 AM   #1
Huskerguy
Senior Member
 
Join Date: March 28, 2009
Location: Kansas
Posts: 347
Scope mount for my AR

Finished a PSA upper and lower with a stainless upper that I am anxious to get out to the range. Picked up a Simmons 6.5 x 20 x 50 scope from Midway over a year ago and am thinking of putting it on this new AR. I know I need taller mounts for the optics to clear and also to move the scope forward. There seems to be a lot of choices out there and I am leaning towards the one piece mounts. I see some that apparently have enough clearance they can still mount a rear site. Looking for options - pictures and links would be helpful. Thanks
Huskerguy is offline  
Old June 14, 2013, 07:53 AM   #2
zukiphile
Senior Member
 
Join Date: December 13, 2005
Posts: 1,660
I am in the midst of a similar search. I am not worried about mounting a rear backup site, but about getting a correct center line height for the scope. The iron sights on an AR are about an inch and a half or nearly 40 mm above the rail.

There are several one-piece mounts that are only 18 mm above the rail at the bottom of the rings, for a centerline of 30.7 mm. This is not sufficient for me to get a good clear image even with a very tight cheek weld. Making your search more difficult is the fact that many places do not list the dimensions for their product.

I do believe the PEPR mount will give you a height above the rail of nearly 40 mm even for their 1 inch rings. On the cheap end, UTG makes an extra tall 30 mm ring for which the bottom of the ring is 25 mm above the rail making the center line 40 mm above the rail. However, I do not find that UTG makes a comparable, extra tall 1 inch ring. You could do something with a riser, but it would undoubtedly be more homely and not necessarily much less expensive than the PEPR.
zukiphile is offline  
Old June 15, 2013, 07:44 AM   #3
sailskidrive
Senior Member
 
Join Date: October 26, 2008
Posts: 726
I went with High Badger Ordnance rings on my varmint rig and American Defense RECON on my 20" AR. I personally don't feel that the one piece removable mounts are a good match for scopes over 6x, as very few return to zero after being removed. The AD in the picture is usually off about 2-3" at 100 yards, I've had better luck with the Bobro one piece mounts.





__________________
SailSkiDrive
Hk USP 45 Expert, USP 40, USP 9, SIG P226, S&W M&P9, Hk 4, Makarov, Desert Eagle 40, Beretta FS92 Centurion, Kimber TLEII 1911A1, Glock 22, SIG P225, 1943 Rem Rand 1911A1, S&W mod 64, Walther PPQ, SIG P229, Browning BDA 45 (SIG P220), Hk45, SIG P230
sailskidrive is offline  
Old June 16, 2013, 09:30 AM   #4
wnycollector
Senior Member
 
Join Date: April 22, 2007
Posts: 1,834
I have a 3-10x50 Weaver Super Slam on one of my AR's using a Burris PEPR mount. You should have enough clearance for your 56mm scope.
wnycollector is offline  
Old June 19, 2013, 08:05 AM   #5
Ibmikey
Senior Member
 
Join Date: June 1, 2013
Location: Medical Lake Wa.
Posts: 676
I bought a cantilever mount which handles a Nikon Prostaff 3x9 x40. Aluminum construction and it is listed on fleabay for $19.95. It is identical to a friend's. $80 Burris mount.
Ibmikey is offline  
Old June 19, 2013, 08:12 AM   #6
Sea Buck
Senior Member
 
Join Date: September 9, 2008
Location: New England,Florida Snow Bird
Posts: 240
I put a Simmons 3X9 40mm wide view on my Bushy VMax for coyotes. Perfect fit. Burris mounts. Lot's of dead dogs.
Sea Buck is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:07 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07822 seconds with 9 queries