The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 4, 2013, 07:06 PM   #1
paulsnapp
Junior Member
 
Join Date: April 23, 2013
Posts: 13
When to size and lube bullets?

After I am done casting a few hundred bullets, how long should I wait before I size and lube them? Right away are they softer and size better? A wait period for them to harden for better sizing? Is there a wait period that is too long that they become too hardened for best sizing? Thanks for any advice!
paulsnapp is offline  
Old June 4, 2013, 08:14 PM   #2
chiefr
Senior Member
 
Join Date: January 27, 2010
Location: AR
Posts: 1,294
You can wait forever to lube and size after you cast. You do not want to lube warm bullets as the lube has low melt point.
If you casting for black powder carts and use Lyman BP Gold or SPG lube, you will find an even lower melt point.
chiefr is offline  
Old June 4, 2013, 11:17 PM   #3
Grump
Member
 
Join Date: October 22, 2008
Posts: 54
Store them bare and size/lube a week's or a month's supply for your reloading volume.

Over at CastBoolits, there are at least 3-4 proven homebrew mixes that don't drip in the heat, and most smell better than RCBS and Lyman's lubes. Some can be bought from vendor sponsors there. I've had good luck with TAC#1 from a user there named RandyRat.

But experimentation is close to finished on 2-3 other lubes that absolutely will not drip even if left on the dashboard on a hot sunny day. Try 138°F. One of them does NOT produce cold-weather first shot flyers from multiple rifles and shooters from last winter's testing.

IME, the slight additional hardness 3+ days after casting really makes no difference in sizing. But if you have a push-through sizer, remember to put a lubed one through every 10-20 bullets to keep things nice.
Grump is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05745 seconds with 7 queries