The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 1, 2013, 05:42 AM   #1
JKilbreth
Member
 
Join Date: May 10, 2012
Location: Georgia
Posts: 97
Crimp 45ACP with Lee 45LC FCD?

I was just wondering: could I use the Lee FCD in .45 Colt to crimp a .45 ACP cartridge somehow? I know it's probably a long shot, seeing as how I have no idea how to get a shorter case into the longer die shaft, but I can't find a FCD in .45 ACP, and I already have the .45 Colt FCD.

Thanks in advance!
JKilbreth is offline  
Old June 1, 2013, 06:28 AM   #2
spacecoast
Senior Member
 
Join Date: October 14, 2009
Location: Sunshine and Keystone States
Posts: 4,049
It might be possible to insert a spacer between the die adjustment screw and the die shaft, however the two cases have neck diameters of .480 (Colt) and .473 (ACP) so that might present another problem.

A bigger issue perhaps is that the crimp applied to the .45Colt is normally a roll crimp, whereas the .45ACP requires a taper crimp.
spacecoast is offline  
Old June 1, 2013, 02:34 PM   #3
mmb713
Senior Member
 
Join Date: March 15, 2011
Location: Salt Lake City, UT
Posts: 286
No. The 45 Colt FCD applies a roll crimp, a very good one I might add. The 45 Auto requires a taper crimp for proper headspacing. Even if you could get a 45 Auto cartridge to contact the crimping portion of a 45 Colt FCD you would just end up ruining the cartridge.
mmb713 is offline  
Old June 1, 2013, 02:35 PM   #4
Edward429451
Junior member
 
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
No. The 45acp case is too short to reach the crimping portion of the taller 45 Colt. Different kind of crimp too.
Edward429451 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06121 seconds with 7 queries