The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old May 23, 2013, 03:53 PM   #1
BumbleBug
Senior Member
 
Join Date: March 11, 2013
Location: Near Heart of Texas
Posts: 471
Did I waste $5 on this Dial Indicator?

I went to a garage sale today & I bought this gadget for $5. What I was really after was the dial indicator to use for some hobby lathe work or as a reloading concentric gauge. The platform weights about 10lbs. The gauge only moves about 1/8" & it seems to have no return spring tension.


Gauge says: Fully Jeweled; Federal; Providence R.I.;Mod C71;.0005"
Is it ok to oil the shaft? Did I waste my $5

TIA...

...bug
BumbleBug is offline  
Old May 23, 2013, 08:21 PM   #2
geetarman
Senior Member
 
Join Date: November 18, 2009
Location: Arizona
Posts: 2,750
What you have is a Federal dial indicator with a balanced dial. Without having it in hand, I would guess it is probably dirty.

Most likely the shaft is gummed up. They are actually quite good and accurate. The setup you have would be used as a small comparator. Set up with a gage block to the desired dimension and then pass the work pieces between the platen and the indicator tip and look at the variance from nominal.

If no parts are needed, you have a bargain.

Don't oil the shaft, it will make things worse. You might try a little alcohol and try to move the shaft in and out.

Take off the back and you should see the movement. There are two screws on the baseplate.

Don't loosen them. If you do, you will disengage the movement from the rack and you will lose the pretension on the hairspring.

Send me a PM if you want to know how to take it apart for cleaning. It not difficult but you do need to be careful.

You have a precision instrument and it should NOT have much return spring tension. There should be some. If you have the back off, you should see a long spring that provides return tension. It might have become disengaged.

Good luck!!
__________________
Geetarman

Carpe Cerveza

Last edited by geetarman; May 23, 2013 at 09:00 PM.
geetarman is offline  
Old May 23, 2013, 09:25 PM   #3
BumbleBug
Senior Member
 
Join Date: March 11, 2013
Location: Near Heart of Texas
Posts: 471
yippie!

geetarman, you are a genius! A little alcohol & a minute or two of in-n-out & it seems to be working great!

Thanks!

...bug
BumbleBug is offline  
Old May 24, 2013, 09:48 AM   #4
armabill
Senior Member
 
Join Date: August 16, 2001
Location: Glenolden, Pa. USA
Posts: 205
Glad that you got it working. You got a great deal.
armabill is offline  
Old May 24, 2013, 04:51 PM   #5
Gunplummer
Senior Member
 
Join Date: March 11, 2010
Location: South East Pa.
Posts: 1,454
The base would have been worth $5 to me. Good deal.
Gunplummer is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06641 seconds with 7 queries