The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old May 10, 2013, 04:13 PM   #1
caltx01
Junior Member
 
Join Date: April 7, 2013
Posts: 3
Are There Any REAL Gunsmiths Left?

I have a Winchester 94 in .44 Magnum that was manufactured in 1971. It is one of my favorite rifles and I carry it with me to my farm regularly. Recently it has developed a problem. When I cycle the action I will occasionally have a cartridge release and go under the lifter. This causes a jam and I have to take the lever out to clear it.

I would like to get this problem fixed. Research indicates it can be one of a few things and all are repairable. So I started looking around in east Texas where I live for a good gunsmith to make this repair for me. To my dismay I have found that all the gun shops I have contacted either no longer have a gunsmith or their "smith" is only capable of placing high dollar accessories on AR rifles - not much more.

So I started asking around about reputable gunsmiths and have found again that none are interested in working on anything much more than 1911s or AR rifles.

I am willing to ship this rifle anywhere I need to in order to get it to a competent gunsmith who will repair it for me. Can anyone anywhere suggest a good gunsmith who is competent and willing to work on a Winchester 94?

Thanks very much for all advice and assistance.

Cal Barton
Tyler, Texas
caltx01 is offline  
Old May 10, 2013, 04:20 PM   #2
Bart B.
Senior Member
 
Join Date: February 15, 2009
Posts: 5,012
Ship it back to Winchester and I think one of their shop's 'smiths will fix it.

Call 'em to arrange this.
__________________
US Navy Distinguished Marksman Badge 153
Former US Navy & Palma Rifle Team Member
NRA High Power Master & Long Range High Master
NRA Smallbore Prone Master
Bart B. is online now  
Old May 10, 2013, 04:27 PM   #3
caltx01
Junior Member
 
Join Date: April 7, 2013
Posts: 3
I talked to "Winchester" and was told before I was even allowed to state my problem that there is at least a 16 week backlog for repairs. Then when I described my problem I was told that the necessary part was only available for 94AE models.

I know this is probably not true, but this is the help I got from "Winchester".
caltx01 is offline  
Old May 10, 2013, 04:28 PM   #4
Microgunner
Senior Member
 
Join Date: March 6, 2006
Location: Central Florida
Posts: 2,975
These people are world class and can work on any firearm as far as I can tell.
Everything they've done for me has been top notch.
Just don't be in a hurry to get it back, their services are in high demand.

https://plus.google.com/106345411225...ut?gl=us&hl=en
__________________
Proud NRA Patron Member
Microgunner is offline  
Old May 10, 2013, 05:06 PM   #5
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 16,926
Gunsmiths tend to specialize today with some only working on pistols like the 1911, others on ARs, yet others on custom guns. They're as specialized as auto mechanics.

Can you also confirm that unlike a tube fed shotgun, there are no shell stops on either side of the magazine tube?

If the answer is yes to the above, can you confirm that the link sits atop of the carrier, right? (sorry, I could only come up with some images online).

If so, then the carrier/link is supposed to keep the next cartridge from exiting the magazine tube. Therefore, the connection between the carrier and link is wrong. Perhaps it is reassembled incorrectly. It could be something is worn too.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is online now  
Old May 10, 2013, 10:05 PM   #6
PVL
Senior Member
 
Join Date: February 20, 2013
Posts: 169
I'd ask the local Cowboy action shooters about a good levergun smith. - They'll know somebody who knows leverguns inside and out.

You might get quicker service that way, maybe get the thing slicked up too.
PVL is offline  
Old May 11, 2013, 03:18 AM   #7
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 3,721
Agreed on the cowboy shooters,they will be able to network you someplace.
SASS has a newletter with advertisers.

Leverguns can be ammo sensitive,overall length,bullet shape,etc.One classic example is the common Lyman 240 ish grain Keith bullet.The ogive is a little long.If you crimp into the crimp groove,these bullets tie up Marlins and 92's pretty bad.I do not know the 94/.44.

The 215 gr Keiths feed real well.
HiBC is offline  
Old May 12, 2013, 03:53 PM   #8
oldgunsmith
Senior Member
 
Join Date: January 9, 2013
Posts: 278
Before you spend a lot of money on it be sure you're not inadvertently short stroking the lever. On the 94 .44 the lever needs to go from closed to fully open in one motion without stopping or slowing down on the way, and closed the same way. This, of course, applies to any lever gun, but the 94 .44 is one of the easier ones to cause what you've described by jacking around with the lever between open and closed.
oldgunsmith is offline  
Old May 13, 2013, 12:58 AM   #9
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,476
Call John Taylor at 253-445-4073. He is a fantastic gunsmith, the best I know.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07385 seconds with 9 queries