The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old April 29, 2013, 04:54 AM   #1
Muddymatt
Junior Member
 
Join Date: April 28, 2013
Posts: 3
Marlin camp 9 suppressor specs

Hi all,

I have just picked up a nice condition camp 9 and i'm toying with the idea of a full overbarrel suppressor. I have seen it done to a few camps but mostly .45's.

Any reason why it wouldn't be good on a 9?

Also does anyone have any spec on what size and number of ports they put in the barrell?

Thanks in advance!

Muddymatt
Muddymatt is offline  
Old April 29, 2013, 09:49 AM   #2
g.willikers
Senior Member
 
Join Date: September 28, 2008
Posts: 5,326
The 9mm will be probably be louder than the .45 due to the velocity being over the speed of sound.
Especially since the longer barrel of the carbine pushes the 9mm much faster than the .45, out of the same length barrel.
Just something to consider.
__________________
Lock the doors, they're coming in the windows.
g.willikers is offline  
Old April 29, 2013, 04:38 PM   #3
Muddymatt
Junior Member
 
Join Date: April 28, 2013
Posts: 3
Thanks for that. I was planning on using 147 gr bullets which are around 950 fps and should be sub sonic.
Muddymatt is offline  
Old April 29, 2013, 07:45 PM   #4
444
Senior Member
 
Join Date: November 20, 2000
Location: Ohio
Posts: 3,727
Often times, when you have an integral suppressor, the actual barrel (inside the suppressor) is far shorter than the full length of the suppressor. In other words the rifle may appear to have a heavy 20" barrel. But the actual barrel length is 10" (or whatever).
The point being, that these barrels are designed to not allow a given ammo to go supersonic. I have a M-169 AR15/9mm upper that was designed to shoot common Wal-Mart 115 grain bulk packed ammo at subsonic velocities.

FWIW: my experience with suppressors in general is that the small hole is quieter. I am no suppressor expert and am basing this primarily on two suppressors that I own. One 9mm and one in .45 ACP. This is flawed comparison since the two suppressors are manufactured by different companies, the guns are different............ But, when using sub-sonic ammo, the 9mm can is significantly quieter than the .45 can. They arn't even close.
__________________
You know the rest. In the books you have read
How the British Regulars fired and fled,
How the farmers gave them ball for ball,
From behind each fence and farmyard wall,
Chasing the redcoats down the lane,
Then crossing the fields to emerge again
Under the trees at the turn of the road,
And only pausing to fire and load.
444 is offline  
Old April 29, 2013, 09:30 PM   #5
Muddymatt
Junior Member
 
Join Date: April 28, 2013
Posts: 3
That's interesting, thanks. I was planning on porting the barrel to some degree but if i shortened the barrel instead and fitted a longer suppressor that might be the way to go.
What do you think is a good ratio? Barrel to suppressor?
Muddymatt is offline  
Reply

Tags
camp , carbine , marlin , ported barrel , suppressor

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07177 seconds with 9 queries