The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools
Old April 9, 2013, 10:15 PM   #1
Big Caliber
Senior Member
 
Join Date: October 10, 2006
Location: S. CA
Posts: 396
AR bullet weight

I'm looking for some thoughts on what might be the best 223 caliber bullet weight for an AR with a 16" barrel, with a 1 in 9 twist. I have found loading bolt rifles that they tend to prefer bullets slightly heavier than the middle weight offered in a given caliber. So far, all I can find are 50 grain RP's in .224. What do you think???
Big Caliber is offline  
Old April 9, 2013, 10:36 PM   #2
Gdouthit
Junior Member
 
Join Date: January 11, 2013
Posts: 7
AR bullet weight

Not an ar but dads mini 14 has a 1-9 twist and loves a 62-69 gr bullet. Much more accurate than with the 50-55 grainers
Gdouthit is offline  
Old April 9, 2013, 11:22 PM   #3
jersurf101
Senior Member
 
Join Date: January 27, 2013
Location: Eastern NC
Posts: 264
My 16"' 1/9 twist AR loves good old pmc 55 grain bronze ammo. Anything 55 grn is where I would start with a 1/9.
jersurf101 is offline  
Old April 9, 2013, 11:26 PM   #4
JustinBiscuit
Senior Member
 
Join Date: September 18, 2011
Location: Wisconsin
Posts: 184
http://www.jbmballistics.com/cgi-bin/jbmstab-5.1.cgi
JustinBiscuit is offline  
Old April 10, 2013, 04:27 AM   #5
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 3,622
I had a 16 in h-bar with 1 in 9 ,and my load was 25 or 25.5 gr Varget behind a 69 gr Nosler custom comp.Seems like it chrono'd 2750 or so.

My bolt carrier ran clean,it grouped on a quarter at 100 yd.Try it.The Sierra MK works great,too
HiBC is offline  
Old April 11, 2013, 02:41 PM   #6
ligonierbill
Senior Member
 
Join Date: May 20, 2007
Posts: 769
Can't tell you it's the best weight, but yesterday I got good results from my 16" 1:9 AR with 65 gr Sierra GameKings. Either TAC or BL-C(2), which I was testing yesterday, give me 2,850 fps with good consistency. Good groups, but it was really too windy to go "for record".
ligonierbill is offline  
Old April 11, 2013, 09:17 PM   #7
Ben Dover
Senior Member
 
Join Date: April 11, 2013
Location: High up in the Rocky Moun
Posts: 195
The military style 55 grain bullets from Winchester work quite well in my Colt AR.

It is a model 6920 with a rifling twist of 1/7.

Sixty two grain green tipped 855 type ammunition is also satisfactory, although I have not found a reliable source of the component bullets for hand loading.

Since I no longer compete in matches, I have chosen to eschew the more expensive Sierra and Speer bullets in favor of the bulk military components.
Ben Dover is offline  
Old April 12, 2013, 02:14 AM   #8
NWPilgrim
Senior Member
 
Join Date: September 29, 2008
Location: Oregon
Posts: 2,149
AR bullet weight

The best weight I have found is 68-69 gr BTHP. Seems to work well with any powder. But I have also found e excellent loads with 55 and 62 gr FMJ. You will find the most styles and quantity and best prices in the 50-55 gr range so that would be a good place to start. If you can find find Nosler 69 gr HPBT then try those or the ones by Sierra or Hornady. But 55 HP, SP, or FMJ should shoot well, too.
NWPilgrim is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07897 seconds with 7 queries