The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools
Old April 13, 2013, 05:30 PM   #1
Steezy
Junior Member
 
Join Date: April 12, 2013
Posts: 8
Ruger Hawkeye

I've had a new Ruger 7mm mag bolt rifle sitting in my safe for a couple years now. I bought a 12x Leupold scope for it with the intentions of long distance hunting with it. I have tried using weaver high scope rings and now leupold rings, and neither set will tighten down on the front part of the receiver... is my receiver "bad?" Anyone else have this problem? The rifle was manufactured in about '07-09. Thanks to all who respond, I will take pics of the whole mess later.
Steezy is offline  
Old April 13, 2013, 06:49 PM   #2
603Country
Senior Member
 
Join Date: January 6, 2011
Location: Thornton, Texas
Posts: 2,215
Get the Ruger rings. Problem should be solved.
603Country is offline  
Old April 13, 2013, 06:51 PM   #3
Ruger480
Senior Member
 
Join Date: February 23, 2013
Location: Central Iowa
Posts: 484
Send pics anyway
Ruger480 is offline  
Old April 14, 2013, 09:19 PM   #4
Chowder
Senior Member
 
Join Date: July 3, 2012
Location: Anchorage, AK
Posts: 411
Yes pictures will make it work . I do not own a hawkeye but I have a friend who just bought one and it came with the Ruger rings. I helped him sight it in and the Ruger rings worked great. I suppose they should though since they were made for the rifle. Let us know how that 7mm shoots! I am in the middle of a move and also injured so my Savage 7mm is still in pieced waiting for the attention it deserves!
__________________
"Do what is right, do what is necessary, everything else is negotiable"

For Sale FightForTheConstitution.com
Chowder is offline  
Old April 15, 2013, 09:15 AM   #5
AllenJ
Senior Member
 
Join Date: December 11, 2009
Location: Northern California
Posts: 1,253
+1 for 603Country's response. Midway has a pdf that tells you which Ruger rings to use with different size scopes, you can find it here: http://www.midwayusa.com/General.mvc...licationCharts

Look for Ruger Ring Chart.

Last edited by AllenJ; April 15, 2013 at 05:23 PM.
AllenJ is offline  
Old April 15, 2013, 09:47 AM   #6
Steezy
Junior Member
 
Join Date: April 12, 2013
Posts: 8
Thanks for the replies! Actually, I think I have tried the Ruger rings that it came with, but they weren't high enough for the 50?mm scope. I don't even know if the ruger rings are in the shop now or if they are on a different rifle I will have pictures up late tonight, they new GF has the cellphone and that is my only source of getting pictures to my computer
Steezy is offline  
Old April 15, 2013, 10:02 AM   #7
jmr40
Senior Member
 
Join Date: June 15, 2008
Location: Georgia
Posts: 5,810
Order directly from Ruger.

http://shopruger.com/searchprods.asp


The neat thing about Ruger rings is that you typically only need to order 1 ring to change height. They come in 4 heights. Low, medium, high, and extra high. They come from the factory with 1 medium ring which goes on the front. Place the high ring on ring on the rear for scopes up to 40mm. If you want a higher setup just move the high ring to the front and order an extra high for the rear.
jmr40 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07620 seconds with 9 queries