The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 13, 2013, 01:47 AM   #1
Tmitch
Member
 
Join Date: January 22, 2013
Posts: 27
I'm getting back into reloading

I'm getting back into reloading after I retired. Should I wait and buy new or try to buy used equipment after the dust settles? I will be reloading only pistol, 44 mag, 45 auto rim. I'll be shooting 100/200 rds each every week or so maybe more maybe less. Any sugestions on on what press I should look for?
Tmitch is offline  
Old April 13, 2013, 06:28 AM   #2
ligonierbill
Senior Member
 
Join Date: May 20, 2007
Posts: 735
If you can find a good price on a used press from any of the major makers, go for it. My old RCBS Rockchucker is good as new at 15. Doesn't sound like you are loading enough to justify the cost of a progressive setup, but you might get there. Recently I added a RCBS turret press, which is convenient. Just get a turret for each caliber, set your dies, and you're good to go. I started with RCBS and have stayed with them. Good sturdy stuff, but I can't say it's better than the others.
ligonierbill is offline  
Old April 13, 2013, 06:54 AM   #3
Misssissippi Dave
Senior Member
 
Join Date: December 5, 2009
Posts: 1,405
I think it might depend on how much time you plan to spend loading your ammo. The Lee Classic Turret should get the job done in an hour or two each week. You can get different plates for the dies so the switch is fairly straight forward. It can be used in single stage mode and switched to progressing mode. It isn't a true progressive. You still pull the handle once for each station.

Progressive presses can make very short work of your loading. I do believe they would similar to getting a top end race car for 25 mph drive in the city to go to work with. I load about 100 rounds in 20 minutes with a Dillon 550b when it is already set up for a caliber. I'm not all that fast either. I also don't switch calibers unless I have at least 1000 rounds to load. It isn't worth the effort to me.

If you want to spend more time each week loading a good single stage press will get the job done. It is relaxing and there is nothing a single stage can't do in my opinion. They are just slow going.
Misssissippi Dave is offline  
Old April 13, 2013, 06:59 AM   #4
Shootest
Senior Member
 
Join Date: February 9, 2011
Location: Just outside Cleveland, Ohio
Posts: 605
Try this it is new, in stock and all you need except dies.

http://www.midwayusa.com/product/785...dex-deluxe-kit
__________________
The private ownership of firearms is an American Heritage. Anyone who disputes that is Anti-American and unpatriotic.
NRA Life Member
http://s1096.photobucket.com/albums/g327/Wynn3/
Shootest is offline  
Old April 13, 2013, 07:11 AM   #5
L2R
Senior Member
 
Join Date: November 5, 2010
Location: North Carolina
Posts: 220
^ +1 on the start up kit

It will run over 200 / hour but I probably average just over 100 / hour because I stop, check and measure often.

Still, for the money and amount I shoot, it seems to be a good price for it's capacity.

Biggest plus might be the ease in popping off one turret and putting on another in just a few seconds if you want to change die sets.
__________________
L2R


Evil cannot be reduced thru Legislation!
L2R is offline  
Old April 13, 2013, 10:17 AM   #6
BumbleBug
Senior Member
 
Join Date: March 11, 2013
Location: Near Heart of Texas
Posts: 421
Quote:
Originally Posted by Tmitch
I'm getting back into reloading after I retired.
What happened to your old gear? Except for the multi-station/progressive presses, not a lot has changed. Some of my stuff is 45+ years old & still serves me well.

...bug
BumbleBug is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07758 seconds with 9 queries