The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Closed Thread
 
Thread Tools
Old March 30, 2013, 11:00 PM   #1
j357
Senior Member
 
Join Date: January 25, 2009
Location: Liberty Twp, OH
Posts: 220
What Components did you Find Today? Give up your source if you are stocked up.

I went out today to get a few components in the Northern Cincinnati area. I expected to be come back empty handed but had to get out for a drive.

I managed to purchase 1 of several bricks of primers behind the counter at Target World. I got 1k CCI LR Primers @ $32+Tx which was amazing given the $47 price they had on several boxes of Vance lead pistol bullets I recently paid in the neighborhood of $$35 for. I passed on those and the average of $24 lb for powder they had in limited supply. (I hate going into this place, I get a sharp acidic taste in my mouth, but at least they had some supplies.)

I then went up to South Lebanon to the Country Attic and found the powders I have been wanting. HP38 and Universal at $20 a pound. They had little to no bullets for pistol or rifle, but a good supply of BR-4 and LPM primers.

Had a good trip overall and plan to start my first work on a new project in 30-30 WCF loading tomorrow.

Hope this helps.
j357 is offline  
Old March 31, 2013, 10:41 AM   #2
t45
Senior Member
 
Join Date: January 29, 2010
Location: Belews Creek, NC.
Posts: 599
1000pcs of Winchester 223 brass. I never left the porch. UPS is my friend.
t45 is offline  
Old March 31, 2013, 12:06 PM   #3
arizona98tj
Senior Member
 
Join Date: December 10, 2007
Location: Arizona
Posts: 973
I picked up some large pistol primers at the local Cabela's (Glendale, AZ) a week ago Saturday. They had about 60 bricks on the shelf....a day later, when I went back to pick up a order that I had shipped to the store, I checked the shelf and there were still a half dozen bricks. I was amazed they had lasted 24 hours over the weekend. They have sporadically had powder on the shelf, typically brands I don't use or am not even familiar with.
__________________
stu-offroad.com
Largest Jeep TJ project site on the web!
(now with guns)
arizona98tj is offline  
Old March 31, 2013, 01:33 PM   #4
Beanie-Bean
Member
 
Join Date: October 4, 2011
Location: Central TX
Posts: 84
Montana Gold

Just ordered 2000 .400 CMJ bullets from Montana Gold
__________________
Ammo by Dillon and Hornady
Beanie-Bean is offline  
Old March 31, 2013, 01:43 PM   #5
lamarw
Senior Member
 
Join Date: April 12, 2010
Location: Lake Martin, AL
Posts: 1,745
Received a thousand pieces of .380 brass from my postman yesterday ("Today" per title of yesterday's post). I was criticized by another forum member a month ago for posting about getting ammo stuff on a different day than his "Today" titled post.

It was more than funny since that post stayed active for a month.

Sorry, I am not stocked up and don't want to reveal my source.
lamarw is online now  
Old March 31, 2013, 02:02 PM   #6
Burly
Junior Member
 
Join Date: February 3, 2013
Location: Kalifornia
Posts: 6
We've been doing ok on powder at the local Basspro. Its not a solid supply but a good varity has been trickling in if you're able to get in there when the doors open. Here's a hint, if there's more than 10 people standing at the door waiting for it to open, somebody knows something showed up lol. In the past two months I've seen magnum pistol primers on the shelf twice and in very limited quantity. Nothing else as far as primers go. Still making my rounds to the local shops when I can to try and scrounge some supplies up.
Burly is offline  
Old March 31, 2013, 02:15 PM   #7
MEATSAW
Senior Member
 
Join Date: May 1, 2009
Location: Burnet, TX
Posts: 684
just got 1500 hornady .224 55gr softpoints for my AR. That should keep me busy while this thing blows over
__________________
Veteran OEF (2002) and OIF1 (2003) - US Army
Member of the Burnet Gun Fighters, Inc. and of course the NRA
Oregon State University alum -- Go Beavs!
MEATSAW is offline  
Old March 31, 2013, 06:58 PM   #8
chiefr
Senior Member
 
Join Date: January 27, 2010
Location: AR
Posts: 1,225
All I could find was:

Out of stock, no backorder
Out of stock, backorder OK
Call for availabilty
Item backordered
Sold out
Shipment due in Jun-July 2013

chiefr is offline  
Old March 31, 2013, 08:25 PM   #9
black mamba
Senior Member
 
Join Date: September 13, 2011
Location: O'Fallon, MO
Posts: 555
wrong post

Last edited by black mamba; April 1, 2013 at 07:37 PM.
black mamba is offline  
Old March 31, 2013, 08:29 PM   #10
drklude
Member
 
Join Date: January 30, 2013
Posts: 38
Just yesterday I got the 1000 124 gr. of 9mm FMJ bullets from precision delta that I ordered about two months ago.
drklude is offline  
Old April 1, 2013, 05:00 PM   #11
Kevin Rohrer
Senior Member
 
Join Date: May 19, 2010
Location: Medina, Ohio
Posts: 507
J357: If you were in my area, I could recommend several locations that are well-stocked.
__________________
Member: Orange Gunsite Family, NRA--Life, Varmint Hunters' Assn., ARTCA, American Legion, & South Cuyahoga Sportsmen's Assn.

"Gunnery, gunnery, gunnery...all else is twaddle!" --Admiral Sir John Fisher, RN
Kevin Rohrer is offline  
Old April 1, 2013, 05:03 PM   #12
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 3,299
I got bullets and brass from MidSouth Shooters Supply, ordered it friday before last and got it last friday.
__________________
Thanks for coming!
hooligan1 is offline  
Old April 7, 2013, 04:24 PM   #13
rlc323
Senior Member
 
Join Date: January 23, 2013
Location: Forgottonia, Il
Posts: 217
Recobs

Winchester Small Pistol Primers in stock, at least for now. Sun 4 pm.

http://www.recobstargetshop.com/browse.cfm/4,533.html
rlc323 is offline  
Old April 7, 2013, 04:29 PM   #14
Swampman1
Senior Member
 
Join Date: February 17, 2013
Location: South Louisiana
Posts: 406
Quote:
Winchester Small Pistol Primers in stock, at least for now. Sun 4 pm.
Nice. What was the total cost with shipping/hazmat?
Swampman1 is offline  
Old April 7, 2013, 06:38 PM   #15
Vettebeach
Junior Member
 
Join Date: March 2, 2013
Location: Gulf Coast
Posts: 6
Thanks!

Thanks, RLC323!
__________________
Which way to the beach?
Vettebeach is offline  
Old April 7, 2013, 06:40 PM   #16
m&p45acp10+1
Senior Member
 
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,310
I found 55 pieces of .357 Mag brass. My source was a guy at the range that gave me his brass after he shot it . I let him shoot a couple of my guns as well.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.
m&p45acp10+1 is offline  
Old April 7, 2013, 07:52 PM   #17
Crashbox
Senior Member
 
Join Date: November 3, 2009
Location: Lynden, Washington
Posts: 194
This past Thursday I received (1000) .357 Magnum cases from Starline. About ten days prior they shipped the (500) .38 Special +P's I ordered for making Speer shotshell snake shredders.
__________________
Four Rugers, three SIG Sauers, assorted rifles. NRA, GOA and SAF Life Member.
Crashbox is offline  
Old April 7, 2013, 08:55 PM   #18
Beginner 1960
Member
 
Join Date: March 11, 2012
Location: East TN
Posts: 46
Got 2lbs of bluedot at bass pro last weekend,was looking for 2400 but these days make do with what u can find
Beginner 1960 is offline  
Old April 7, 2013, 09:43 PM   #19
rlc323
Senior Member
 
Join Date: January 23, 2013
Location: Forgottonia, Il
Posts: 217
Swampman: I didn't buy any as I have a decent supply. HazMat from Recobs is usually $27.50 by UPS but since I live within the delivery area of Spee-Dee delivery out of Wisconsin I usually end up paying $14 to ship powder or primers.
rlc323 is offline  
Old April 8, 2013, 03:53 PM   #20
coldbeer
Junior member
 
Join Date: February 21, 2012
Location: Woodhaven MI
Posts: 477
I went to shooters service looking for some H110 but any other magnum handgun powder like 2400, imr4227 or w296 would of been fine. I was expecting to leave dissapointed, but I left with what might be the last # of H110 for sale in the entire state. I feel like I won the lottery.

I also bought two packs of CCI small rifle primers from van born gunshop last week. They've somehow managed to have primers in stock throughout the current panick event which is amazing.

Both places are in southeast mi and they still have supplies but it's best to call first.

Last edited by coldbeer; April 8, 2013 at 08:55 PM.
coldbeer is offline  
Old April 8, 2013, 09:15 PM   #21
B.Bonham
Junior Member
 
Join Date: June 12, 2011
Posts: 5
I found some small rifle primers in stock at Midway today - bought 2000 or 2 box's of them. They are Winchesters . That should keep my Contender .357 Mag. loaded up for Sunday afternoons for at least a year of plinking. I prefer CCI or Federal but, you can't be too picky these days... Dang hoarders! Now I am having fun bringing out the pair of 1858 Remington New Army's these days - everyone is impressed with them.

My current favorite plinking Recipe is a 38 spl. cartridge with 4.3 grains of Unique powder and a 125 grain SWC lead bullet. Very nice "flat shooting" and cheap to practice with. Not as cheap as a Federal 550 or a 525 .22 cal box - but still, very affordable.

I only have one rule... "Most of all - Have fun!"

Weasel
B.Bonham is offline  
Old April 8, 2013, 09:42 PM   #22
NWPilgrim
Senior Member
 
Join Date: September 29, 2008
Location: Oregon
Posts: 2,150
What Components did you Find Today? Give up your source if you are stocked up.

Just received an order of H110 and Universal from Powder Valley that I ordered 2-3 months ago. They seem to be getting small number of powders in that are sold out within a few hours. It has been so long since I ordered this that it was a pleasant surprise to find it on my doorstep.
NWPilgrim is offline  
Old April 8, 2013, 09:53 PM   #23
droptrd
Senior Member
 
Join Date: September 22, 2011
Location: Illinois
Posts: 310
Megasports. Small and large pistol primers

Diamond K Brass - 1000ct 45acp once fired brass
droptrd is offline  
Old April 9, 2013, 01:14 AM   #24
trapper300RUM
Member
 
Join Date: February 19, 2013
Location: Va
Posts: 39
Dag Ammo

Dag has Tula Primers @ normal prices but the only sell by the case of 5,000 but they have Tula Primers Instock & Dag only charges the $25.00 Haz-Mat fee & no other S&H a case of 5,000 Tula Small Pistol primers are $142.99 per case & thats about $28.40 per 1,000 You must send Dag Ammo a copy of your valid ID & fill out a affidavit that youre of ag to buy ammo & primers
http://www.dagammo.com/shop/. I am gonna try & order some in the next month or two
trapper300RUM is offline  
Old April 9, 2013, 05:18 AM   #25
Gster
Senior Member
 
Join Date: September 2, 2012
Location: N.central Pa.
Posts: 229
Lgs a week ago I picked up 200 Win. 115 gr. fmj bullets in 9mm. Yesterday a pound of Titegroup.
__________________
Gun control means: Being able to hit what you are shooting at.
Gster is offline  
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.13791 seconds with 7 queries