The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Thread Tools
Old April 23, 2013, 01:40 PM   #1
Junior Member
Join Date: April 12, 2013
Location: Norway
Posts: 4
Shooting the .32 rimfire Smith & Wesson

Some time ago I got an Smith & Wesson Model 1 1/2 Second Issue as a gift. It's made in 1869 or 1870 and in good shooting condition. As I only have five original .32 rimfire long cartridges I purchased new brass from H & C Collection in France (Dixie has brass too). The cases utilize .22 starting pistol blanks as primers and the flash hole is bored off center and thus allows the hammer to hit the rim. The heel base bullets are also from H & C and were cast from an old Hensley & Gibbs mould.

But I need a mould for it. Can anyone recommend a bullet mold for the .32 rimfire that will work without altering it?

Here's a video I put together during the first test of the revolver:

The cartridges were loaded with 8 grains of Swiss No. 2 which is maximum. The .22 blank adds quite a bit of power, so it's probably a good idea to use .22 CB (6mm Flobert) as primers instead.

Here are some pictures of the revolver and the ammo:

Oyvind is offline  
Old April 23, 2013, 02:19 PM   #2
Doc Hoy
Senior Member
Join Date: October 24, 2008
Location: Chesapeake, VA
Posts: 4,963


My reading of history convinces me that most bad government results from too much government. Thomas Jefferson
Doc Hoy is online now  
Old April 23, 2013, 02:34 PM   #3
Senior Member
Join Date: October 18, 2011
Location: 609 NJ
Posts: 705
Thats awesome man, thanks for posting!
"...with liberty and justice for all." (Must be 21. Void where prohibited. Some restrictions may apply. Not available in all states.)
RedBowTies88 is offline  
Old April 23, 2013, 03:08 PM   #4
Senior Member
Join Date: October 24, 2008
Posts: 703
Was it easy to find the primers for that 32,, Or are they called blanks ?? Just wondering ; )
There's a GATOR in the bushes & She's Callin my name
>Molly Hatchett<
YARDDOG(1) is offline  
Old April 23, 2013, 03:14 PM   #5
Andy Griffith
Senior Member
Join Date: May 14, 2009
Location: Macon Co. NC
Posts: 584
Any heeled bullet made for the .32 Colt will work.

Here is another article on what another shooter did:

I have a couple of moulds for a .38 short colt from this feller, and I know he makes heeled bullets for .32's and .38's:
Barney Fife: "Nip it, nip it, nip it!"
Andy Griffith:"Oh now Barn'...."
Andy Griffith is offline  
Old April 23, 2013, 08:20 PM   #6
Senior Member
Join Date: December 21, 2010
Location: Houston
Posts: 202
Thanks for sharing!
Roshi is offline  
Old April 24, 2013, 04:19 AM   #7
Junior Member
Join Date: April 12, 2013
Location: Norway
Posts: 4
The primers are starting pistol blanks and are readily available here in Norway, at least. And thanks for the suggestion about Old West Bullet Moulds – I'll check it out
Oyvind is offline  
Old April 24, 2013, 08:16 PM   #8
Bishop Creek
Senior Member
Join Date: March 20, 2011
Posts: 409
Leftover ammo from my (now sold) S&W 1866 "Old Army":

Bishop Creek is offline  

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:03 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06137 seconds with 9 queries