The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Competition Shooting

Reply
 
Thread Tools
Old March 26, 2013, 02:07 PM   #1
ffs1942
Member
 
Join Date: December 14, 2010
Posts: 75
M1 sight Q's?

I'm zeroing my new CMP M1 for 100 yds at the local range using M2 or commercial non ferrous equivalent

Where is the 100 yd mark on the elevation drum? There is a tick mark below the 200 yd mark. Is that it?

What is the up-close prime ordinate range for a 100 yd, 200 yd or 300 yd range?

Is the elevation drum accurate? If I zero for 100 yds and dial to 300, will it get in the 10 ring?
ffs1942 is offline  
Old March 26, 2013, 02:33 PM   #2
Old Grump
Member in memoriam
 
Join Date: April 9, 2009
Location: Blue River Wisconsin, in
Posts: 3,144
I was going to post step by step instructions but this write up is better than what I would put down.
http://www.biggerhammer.net/manuals/garand/sighting.htm
__________________
Good intentions will always be pleaded for any assumption of power. The Constitution was made to guard the people against the dangers of good intentions. There are men in all ages who mean to govern will, but they mean to govern. They promise to be good masters, but they mean to be masters.
--Daniel Webster--
Old Grump is offline  
Old March 26, 2013, 02:50 PM   #3
NWPilgrim
Senior Member
 
Join Date: September 29, 2008
Location: Oregon
Posts: 2,152
For simple target shooting you can do what is done for CMP shoots (the battle sight zero as descried in the previous link is not used for this).

Crank the sight all the way down. Now crank it up 6 clicks. Shoot at 100 yds and adjust up as need to get as close to the bullseye as you can. Most Garands will be on 100 yd zero in 6-8 clicks up from bottom.

When you shoot at 200 yrds go up 1-2 clicks and you should be close. I think 300 yds is another 3 clicks up. Write down type of ammo and the clicks you needed for each yardage on a piece of paper and store that in the oiler hole in the buttstock. Now anytime you or another person picks up the rifle they can refer to the Click data you wrote down and be pretty close on the first shot for those distances.
__________________
"The ultimate authority ... resides in the people alone. ... The advantage of being armed, which the Americans possess over the people of almost every other nation ... forms a barrier against the enterprises of ambition."
- James Madison
NWPilgrim is offline  
Old March 26, 2013, 04:42 PM   #4
Navy joe
Senior Member
 
Join Date: January 28, 2001
Location: VA, USA
Posts: 1,803
You really should record your zeroes for all ranges you plan to shoot at by counting the sight down to bottomed out once you are hitting centered at the range. That way when your sight comes loose you have something to go back to.
__________________
FY47012
Navy joe is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06693 seconds with 9 queries