The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools
Old March 6, 2013, 09:10 PM   #1
Joe Chicago
Senior Member
 
Join Date: November 11, 2011
Location: Chicago area
Posts: 277
Springfield P9 (CZ75 clone) trigger

I have a 1990s Springfield P9 (CZ75 clone) in 9mm which is generally well made, reliable and accurate. The trigger, however, is gritty. I took it to a gunsmith to have a trigger job done around six weeks ago and it was supposed to be done before today. I called and he had not even started because he was having trouble finding an after market hammer. I reminded him that I asked for a trigger job, which - to me - means polishing surfaces and maybe replacing a spring or two. He told me that to smooth both the single and double action trigger pulls he needed to replace the hammer. Note that when I dropped the pistol off there was no mention of replacing the hammer.

To the CZ75 owners out there, does this sound legit? Do you need to replace the hammer to sort out the trigger pull on the pistol? I am starting the wonder if this guy is scamming me.

Thanks for your help.
Joe Chicago is offline  
Old March 6, 2013, 09:17 PM   #2
TunnelRat
Senior Member
 
Join Date: May 22, 2011
Posts: 4,487
I know when CZ custom does a trigger job they install their own hammer that has a different geometry. So it's possible.
__________________
Guns don't kill people. Apes with guns kill people! - Robin Williams
TunnelRat is online now  
Old March 6, 2013, 09:30 PM   #3
Walt Sherrill
Senior Member
 
Join Date: February 15, 1999
Location: Winston-Salem, NC USA
Posts: 4,452
Sound legit? Not really, although that's probably the EASIEST thing for him to do... if he can find a hammer.

The Springfield P9 is really a "sort of" clone of the CZ design, built around Tanfoglio-made components, which are subtly different in a lot of ways from the CZ. If it weren't for that, I'd suggest some of the parts offered by the CZ Custom Shop. The Custom Shop might know if their parts are compatible, however, so a call or email there might not be a bad idea.

Little things like the width of the hammer are different, and they changed over time, too, so that a part that might fit an early model might not fit one made a couple of years later. (I found that this could be true of some CZ parts, too.)

I don't there's much in the way of after-market parts for these older, small-framed Tanfoglio guns, so finding a better hammer will be difficult -- and the gunsmith will probably still have to polish and tune the new hammer.

You might find that just going to a lighter hammer spring might do what you want, and that's something you COULD do yourself. You can get those from Wolff Springs. http://www.gunsprings.com Once you're on the site, do a SEARCH for "Trigger Job."

(There are pictures and instructions on the CZ Forum of how to do your own trigger job, and the design is so similar to the CZ that those pictures and guide will do the job. http://www.czfirearms.us/index.php?P...868&board=40.0

I think I'd ask for the gun back and find someone else to do the work.
Walt Sherrill is offline  
Old March 7, 2013, 05:57 PM   #4
Joe Chicago
Senior Member
 
Join Date: November 11, 2011
Location: Chicago area
Posts: 277
Thanks, Walt and Tunnel
Joe Chicago is offline  
Old March 15, 2013, 02:47 PM   #5
Joe Chicago
Senior Member
 
Join Date: November 11, 2011
Location: Chicago area
Posts: 277
I spoke with the gunsmith again today. He said that last time we spoke he thought my pistol was a CZ75, which would need the hammer. The P9 is not an identical CZ75 clone, and the trigger assembly is slightly different. All the pistol will need is some internal polishing.
Joe Chicago is offline  
Old March 16, 2013, 07:13 AM   #6
hAkron
Senior Member
 
Join Date: March 31, 2011
Location: Akron, Ohio
Posts: 293
A Tanfoglio small frame Witness hammer will work if your smith decides to go that route, but I would imagine unless your hammer is bad for some reason, the only replacement hammer would be a single action only hammer.

Also, I heard recently that Springfield still services these guns under their lifetime warranty, so don't get too crazy with aftermarket parts.
hAkron is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07445 seconds with 9 queries