The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools
Old May 13, 2013, 11:47 AM   #26
Aguila Blanca
Senior Member
 
Join Date: September 25, 2008
Location: CONUS
Posts: 6,510
Your experience is very unfortunate. It makes me wonder if Heritage was really ready to jump on the 9-shot bandwagon. I'm old-fashioned enough that the concept behind building a 9-shot six-shooter completely defies logic. And I think enough companies (including Heritage) have been building six shooters long enough to pretty much have gotten it right.

I hope they make it right for you. It ain't rocket science. Heck, my first handgun was a German-made .22LR (not convertible) six shooter that cost me a whopping $25 ... new. It never, ever missed a beat. Sadly, it disappeared during a move some years back and I was bummed out for a good long while when I realized it had gone walkabout.
Aguila Blanca is offline  
Old May 13, 2013, 12:33 PM   #27
osbornk
Senior Member
 
Join Date: August 11, 2012
Location: Marion, Va
Posts: 218
My 6 shot RR has been flawless. Wonder if the "new" 9 shot has an issue?
osbornk is offline  
Old May 13, 2013, 04:54 PM   #28
newfrontier45
Junior member
 
Join Date: February 23, 2012
Posts: 921
When you're blasting with .22's, more is better. It might be heavy but my USFA 12/22 is NOT for sale.
newfrontier45 is offline  
Old May 13, 2013, 08:32 PM   #29
Wild-Bill
Member
 
Join Date: February 2, 2013
Posts: 83
I have no problems with the Taurus 94. I liked the look of the gun and it will do DA. It now has wood grips and looks good.
They say hind sight is 20/20 and they are right. The "shoulda" has bit me. I went with the 9 shot because it had the fiber sights. Brand new gun and now two bad cylinders so far.
I have emailed Heritage twice, last thurs and fri, and have yet to get a response. I will email again tonight.
Wild-Bill is offline  
Old May 13, 2013, 10:33 PM   #30
dnsharpshooter
Senior Member
 
Join Date: December 28, 2011
Location: Ahwatukee, AZ
Posts: 143
man that sucks. i have a 6 shot RR and its been great
__________________
Ruger 10/22 .22LR, Smith and Wesson 22A .22LR, Smith and Wesson Model 10-10 .38 Special
dnsharpshooter is offline  
Old May 14, 2013, 06:53 PM   #31
Wild-Bill
Member
 
Join Date: February 2, 2013
Posts: 83
As the old saying goes, "if you want something done right you have to do it yourself".
The second bad cylinder from Heritage. This one had a point on the star wheel damaged, more than likely from manufacturing handling. Luckily it was not that bad and I was able to use a jewelers file and smooth out the point. The whole star wheel was a little rough from manufacturing so I cleaned it up with some effort. The "hand" would catch on this point and stick there until you uncocked and rotated the cyl by hand. They say it was test fired 18 times. That tells me that they fired twice with the cylinder not locked in and the chamber not aligned with the barrel.
The RR now locks and cocks and does not jam. I have not test fired it yet. Will do so friday. I expect no problems.
I have lost all faith in Heritage warranty repair after my RR went to them twice and was returned not functioning properly both times. Both times it was a cylinder problem. Gun was new Mar 11, 2013.
I now suffer from the "shoulda bought" syndrome.
Happy Trails Pardners
Wild-Bill is offline  
Old May 26, 2013, 09:37 PM   #32
Wild-Bill
Member
 
Join Date: February 2, 2013
Posts: 83
As if anybody really cares about a Heritage Rough Rider.
After the fiasco I just went thru with Heritage warranty repair with a brand new gun and they couldn't get it right after two trips to Miami, the gun now operates perfectly after I fixed it. Two defective cylinders, the last one fixable. It now cocks, locks tight and fires on all 9. And seems to be pretty accurate. I ran four cylinders full with out a hitch.
It is a good feeling to have a working SA revolver regardless of manufacture.

Last edited by Wild-Bill; May 28, 2013 at 09:00 PM.
Wild-Bill is offline  
Old May 26, 2013, 10:44 PM   #33
Tad_T
Senior Member
 
Join Date: December 14, 2012
Location: Idaho
Posts: 129
I'm glad you got it fixed, Bill. I was hoping that you would. It's too bad that you had to do it.

I have had good luck with all three of my Rough Riders. I hope that you can enjoy yours now.
Tad_T is offline  
Old May 27, 2013, 11:16 PM   #34
Wild-Bill
Member
 
Join Date: February 2, 2013
Posts: 83
Thanks Tad.
I'm glad I got it fixed and have the "cowboy gun". I don't need to brag about the manufacturer of a gun, I just need it to shoot good and my Heritage does do that now.
Wild-Bill is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07722 seconds with 8 queries