The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools
Old March 9, 2013, 11:18 AM   #1
Lance8300
Junior Member
 
Join Date: March 9, 2013
Posts: 3
Need some help identifying a Woodsmaster 740

I have obtained a Remington Woodsmaster 740
Magazine fed with matching scope.
It appears to have been manufactured July 1959
The problem I am having is identifying it.
After days of searching I can not find any info or photos of one like mine. Mine has a stainless colored barrel, receiver, magazine, sling rings, butt plate and scope.
It has beautiful walnut stock.
The fore stock has (7) large diamonds on lower side, the grip area has checkered design.

I would like to find out some more about this gun, am curious as to why I have not been able to locate another one like it.

Also curious as to rarity and value for insurance reasons. I'm not interested in selling as it is a family hand me down.
Attached Images
File Type: jpg image.jpg (241.2 KB, 75 views)

Last edited by Lance8300; March 9, 2013 at 11:43 AM. Reason: Add pic
Lance8300 is offline  
Old March 9, 2013, 11:40 AM   #2
Goatwhiskers
Senior Member
 
Join Date: April 8, 2009
Location: Batchelor, La.
Posts: 463
Remington never made the 740 in stainless. Sounds as tho the gun and all parts may have been electroless nickel plated at some point, or the entire gun was stripped, polished, and some sort of sealer put on. Electroless nickel on a dull polished or blasted surface would resemble stainless. Scope could be stainless. Goat
Goatwhiskers is offline  
Old March 9, 2013, 11:44 AM   #3
Lance8300
Junior Member
 
Join Date: March 9, 2013
Posts: 3
Added pic

Added pic
Lance8300 is offline  
Old March 9, 2013, 06:47 PM   #4
jmr40
Senior Member
 
Join Date: June 15, 2008
Location: Georgia
Posts: 5,870
Someone has no Nickle plated the gun. It didn't leave the factory that way. If done right it is an interesting custom touch that helps with weather resistance. Some would pay a little extra I would pay less
jmr40 is offline  
Old March 10, 2013, 07:22 PM   #5
publius
Senior Member
 
Join Date: January 25, 2005
Location: Mississippi/Texas
Posts: 2,448
Yes, I'ts Nickel plated. Very cool gun. I'd rather have yours than a standard blued.
__________________
"Suppose you were an idiot, and suppose you were a member of Congress, but I repeat myself." Mark Twain
publius is offline  
Old March 10, 2013, 07:58 PM   #6
Lance8300
Junior Member
 
Join Date: March 9, 2013
Posts: 3
if it has been done after production then they did a fantastic job, it looks factory done. Even the smallest lettering and stamps are colored same but no appearance of filling the lettring. I love the look of it. Just had never seen another one like it! I got the matching (3) rd mag, (4) (10) mags and about 500rds of ammo with it. It shoots wonderfully, silver dollar grouping at 150yds with 10 rd mag.
Lance8300 is offline  
Old March 10, 2013, 11:23 PM   #7
skywag
Senior Member
 
Join Date: February 24, 2011
Posts: 122
skywag is offline  
Old March 11, 2013, 12:39 PM   #8
Skans
Senior Member
 
Join Date: November 20, 2008
Posts: 7,762
Yes, those rifles were blued - no nickel and definitely not stainless from the factory. The good news for you is that these guns are not all that collectable - they routinely sell for about $300 - $350 on gunbroker. So, the aftermarket nickel job shouldn't hurt value in today's market.

I had one of these guns for years - actually just stored it for someone (and hunted with it some). It is actually a nicely made semi-auto 30-06. I've always felt they should sell for more than they do - never could figure this out. It did have a 20 round detachable magazine - held 20 rounds of 30-06. So, to all those antis out there that claim the AR is a "high-powered rifle", the Woodsmaster, with a 20 round magazine, is a true high-powered rifle.
Skans is offline  
Old March 11, 2013, 08:44 PM   #9
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,270
I am going to stick my neck way out on this, but IIRC Remington did/does offer a nickel plate option on some of its guns. It was in the really fine print in the catalog, but was intended for use in marine and seashore environments where a plain blue gun just wouldn't stand up.

Jim
__________________
Jim K
James K is offline  
Old March 12, 2013, 03:57 PM   #10
Boomer58cal
Senior Member
 
Join Date: February 18, 2013
Location: closer than you think
Posts: 968
Beautiful gun! I like it. On a side note...what caliber is is? If I my ask. And what brand are the ten round mags?

The only reason I ask is I've had very bad experiences with the KKK 10rd'ers. I only have experience with the long action like the 30-06. I've owned 10 old ones( 15 years ago) and 2 newer ones( I was told they had been fixed). All 12 functioned not just badly but dangerously. Sometimes damaging the PRIMER! and jamming the cartridge sideways in the action. Cabela's was good enough to refund my money on the 2 newer ones but KKK would not even talk to me and has ignored my letters. Letters plural and has not returned my $300 for the other 10. Sorry for my bitter rant just wanted to ask that you be careful and test the 10 rds'ers. I have heard the short action ones are better though. Be safe and nice find.

Boomer
__________________
The number one cause of death in the 20th century. 290,000,000 citizens were first disarmed and then murdered by their own governments. This number does not include those killed in war.
We're from the government, we're here to help
Boomer58cal is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08134 seconds with 8 queries