.223 and 308WIN Powder...

Beentown71 · March 1, 2013, 09:35 PM

New to re-loading and going to do the rounds looking for powder. I want one to start with that works well with .223 and 308WIN. My first choice was H335 but what are some other good choices?

Thanks in advance!

oldpapps · March 1, 2013, 10:04 PM

So many....

Check out the lists in any Reloading Book/s.

748, IMR-4895, H-4895, Varget..... These are my first choices. What and how you load and for what will be your determining factors.

Enjoy and be safe,

OSOK

Dan Newberry · March 1, 2013, 10:40 PM

my vote is for 748

grubbylabs · March 1, 2013, 11:15 PM

I just bought a pound of CFE223 for $35.00 today, my only regret is I only have the pound to load with so its 223 for now, but I would like to try it in my 308.

2ndtimer · March 2, 2013, 12:17 AM

a couple of other options that might be available (these days, you need all the options available!) Ramshot TAC, Accurate 2460 and IMR-8208-XBR. I have used each with good results in the .223, would expect decent performance in the .308 Win.

Beentown71 · March 2, 2013, 01:15 AM

Thanks for the replies. I am going to be loading the .223 with 55grain and higher weight bullets. The .308 with 168 grain bullets most of the time.

Looked in my manual and found quite a few options. Was asking to get some favorites or properties of some. Probably just going to get anything that is available.

NWPilgrim · March 2, 2013, 01:23 AM

Hodgdon BL-C2 was the original 7.62x51 powder and also is good in .223. That would be my first choice to load both .223 and .308. Varget would be my second choice.

Marco Califo · March 2, 2013, 01:44 AM

H335 = WC844 military surplus (usually available) = 223 mil spec
can also be used to load 308, where it is best with lighter bullets.
BL-C2 = WC846 military surplus (usually available) = 308 mil spec
can also be used to load 223.

But what I purchased last was Accurate 2520 which will give you maximum velocity with 65, 69 and 75 gr 223 and 165, 168, 180 (all per Sierra manual and Accurates data). I have not loaded any of my one pound jar yet, but am already planning buying more. Accurate ball powders meter very well and I have really liked what I have used so far, which was 8 lbs of Data 2230-C.

rc · March 2, 2013, 02:16 AM

I didn't like 748 in 223. It started to give me high pressure signs with heavier bullets but maybe it's ok with 55s. I found 4895 to be good and it's a go to 308 powder for many. TAC and 2230 are also good in 223 and I've read they work also in 308.

March 1, 2013, 09:35 PM	#1
Beentown71 Senior Member Join Date: March 1, 2009 Location: Midwest Posts: 1,354	.223 and 308WIN Powder... New to re-loading and going to do the rounds looking for powder. I want one to start with that works well with .223 and 308WIN. My first choice was H335 but what are some other good choices? Thanks in advance! __________________ Μολὼν λάβε Time for the Mall Ninja list: Beretta 92fs, Springer XD9, High Standard Model HB, RRA bull bbl...aw heck with it time to go plink

March 1, 2013, 10:40 PM	#3
Dan Newberry Senior Member Join Date: October 3, 2012 Location: Wytheville, VA Posts: 183	my vote is for 748 __________________ *www.BANGSTEEL.com* Practical Long Range Rifle Courses... Optimal Charge Weight handload consulting

March 1, 2013, 11:15 PM	#4
grubbylabs Senior Member Join Date: October 11, 2009 Location: Hansen Idaho Posts: 1,366	I just bought a pound of CFE223 for $35.00 today, my only regret is I only have the pound to load with so its 223 for now, but I would like to try it in my 308. __________________ * (Swinging club) Whack! whack! whack! * Nope, the old nag's still dead . (Capt Charlie)

March 2, 2013, 12:17 AM	#5
2ndtimer Member Join Date: October 10, 2004 Posts: 94	a couple of other options that might be available (these days, you need all the options available!) Ramshot TAC, Accurate 2460 and IMR-8208-XBR. I have used each with good results in the .223, would expect decent performance in the .308 Win. __________________ NRA Endowment Member

March 2, 2013, 01:15 AM	#6
Beentown71 Senior Member Join Date: March 1, 2009 Location: Midwest Posts: 1,354	Thanks for the replies. I am going to be loading the .223 with 55grain and higher weight bullets. The .308 with 168 grain bullets most of the time. Looked in my manual and found quite a few options. Was asking to get some favorites or properties of some. Probably just going to get anything that is available. __________________ Μολὼν λάβε Time for the Mall Ninja list: Beretta 92fs, Springer XD9, High Standard Model HB, RRA bull bbl...aw heck with it time to go plink

March 1, 2013, 10:04 PM	#2
oldpapps Senior Member Join Date: September 22, 2011 Location: Middle America Posts: 297	So many.... Check out the lists in any Reloading Book/s. 748, IMR-4895, H-4895, Varget..... These are my first choices. What and how you load and for what will be your determining factors. Enjoy and be safe, OSOK

March 2, 2013, 01:23 AM	#7
NWPilgrim Senior Member Join Date: September 29, 2008 Location: Oregon Posts: 1,840	.223 and 308WIN Powder... Hodgdon BL-C2 was the original 7.62x51 powder and also is good in .223. That would be my first choice to load both .223 and .308. Varget would be my second choice.

March 2, 2013, 01:44 AM	#8
Marco Califo Senior Member Join Date: April 4, 2011 Location: LA Posts: 580	H335 = WC844 military surplus (usually available) = 223 mil spec can also be used to load 308, where it is best with lighter bullets. BL-C2 = WC846 military surplus (usually available) = 308 mil spec can also be used to load 223. But what I purchased last was Accurate 2520 which will give you maximum velocity with 65, 69 and 75 gr 223 and 165, 168, 180 (all per Sierra manual and Accurates data). I have not loaded any of my one pound jar yet, but am already planning buying more. Accurate ball powders meter very well and I have really liked what I have used so far, which was 8 lbs of Data 2230-C. __________________ ........................................................

March 2, 2013, 02:16 AM	#9
rc Senior Member Join Date: April 28, 2001 Location: CA Posts: 559	I didn't like 748 in 223. It started to give me high pressure signs with heavier bullets but maybe it's ok with 55s. I found 4895 to be good and it's a go to 308 powder for many. TAC and 2230 are also good in 223 and I've read they work also in 308.