The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old March 9, 2013, 10:15 AM   #1
Willie Sutton
Junior member
 
Join Date: January 26, 2012
Posts: 1,066
Don't you hate it when... (Centare observation)

Don't you hate it when you get 4 of something on the bench, planning to keep the best 2 out of the 4, and then......

You slowly realize that..... all..... four.... are...... slightly.....different.......

And the "Collecting Gene" kicks in and that rather than adding a specimen to a collection, you now have yet another sub-collection... (yes, it's a sickness).

So,

Four Centares 1860's, all identical, right?

Nope.

Two different BBl markings.

One has no cylinder scene.

One is not cut for shoulder stock on the butt even though the frame cuts for the stock are there.

Strangely enough, three ARE cut on the butt for the shoulder stock but ALL FOUR are 3-screw and as such cannot accept the stock (meaning that three of them have the frame cuts and the butt cut, one has the frame cut, and ALL FOUR are three-screw).


Hmmm...... Mebbe the Centaur folks did not get ALL of the drawings from Colt...


Still looking and poking. And yes... I'll still be letting at least one go.


Must.... stop.... collecting.....


Willie

.
Willie Sutton is offline  
Old March 9, 2013, 10:54 AM   #2
Doc Hoy
Senior Member
 
Join Date: October 24, 2008
Location: Chesapeake, VA
Posts: 4,598
IMNSHO

Four is not enough Centaures
__________________
Doc

My reading of history convinces me that most bad government results from too much government. Thomas Jefferson
Doc Hoy is offline  
Old March 9, 2013, 10:59 AM   #3
DoubleDeuce 1
Member
 
Join Date: February 21, 2013
Posts: 76
Send them all to me. Then take a few aspirin and pour yourself a cup of coffee, maybe fix your favorite sandwich. I'll make the burdensome selection for you and return those I believe you should have. No charge.

That sort of reminds me of someone I know who was buying S&W revolvers because of the number of screws used to secure the side plate. There was no personal connection to them, family history or anything remarkable or outstanding. The guy just thought screws were cool. He has several of them, all the same except for the number of screws.
DoubleDeuce 1 is offline  
Old March 9, 2013, 12:01 PM   #4
woodnbow
Senior Member
 
Join Date: December 2, 2012
Posts: 129
LOL @Willie... I have three now... one is on it's way to the smith for an action job, one is in the safe and one is on it's way from California... an embarrassment of riches.

BTW, all have the cuts on the recoil shield and butt, none are four screw but didn't the Centaure buttstock fit the three screw frame?
woodnbow is offline  
Old March 9, 2013, 01:20 PM   #5
Willie Sutton
Junior member
 
Join Date: January 26, 2012
Posts: 1,066
Any buttstock will fit a three screw frame... they just don't attach securely... (one of mine came with the stock too... )

Funny that they did not get that detail right. Really... odd. Obviously they did not fully study the originals.


Willie


.
Willie Sutton is offline  
Old March 9, 2013, 01:37 PM   #6
Bootsie
Member
 
Join Date: April 30, 2007
Location: Hofheim/Germany
Posts: 89
Well Willie ... check out the Centaure
# Regular New Model Army or 1st Model, and it's variations and sub-variations: 3 screw frame, with notches in the recoil shield,
with or without toe on the butt, plain cylinders or cylinders with different types of naval scene
# Civilian Model: the one without notches in the recoil shield and no toe on the butt, naval scene on the cylinder with less background details then the Ormsby scene, silver plated TG/BS
... on the MODELS &A VARIATIONS page of www.1960nma.org
... or email me pics at wolf@1960nma.org and I will let you have their model/variation/sub-variation nomenclature in line with the Coppell classification.
Have fun and and enjoy the Centaure virus.
Long Johns Wolf aka Bootsie
Bootsie is offline  
Old March 9, 2013, 01:43 PM   #7
Smokin'Joe
Senior Member
 
Join Date: December 27, 2010
Posts: 136
Not all Colt M1860s had four screws. Some had three screws and an optional hammer screw that stuck out a little on each side that helped secure the stock.
Smokin'Joe is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:16 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07371 seconds with 9 queries