The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools
Old February 25, 2013, 08:05 PM   #1
Hundy
Senior Member
 
Join Date: February 23, 2013
Posts: 106
Uberti Single Actions Pistols

I am looking into getting a Single Action Colt 45. I am not a SASS member or Cowboy action shooter. Not yet at least. I have always liked Single actions, I enjoy firing them and I like the repica's, as far as reading about the history.
I have been looking at the Ruger Vaquero, I own some Ruger Auto's, and I have owned some ruger rifles in the past. Very good firearms, no complaints form me.

I really like the look and the selection of the Uberti's line of Single action revolvers. I was hoping to hear from someone who owns or have owned some. I have seen the single action cattleman at some stores. Looking online I found the Army conversion and Navy conversion and open tops. Those are what I have been looking for. I cannot afford a real authentic one, but I would like to get Uberti one. Just would like to hear how they handle and fire. As dumb as this sounds, I want to confirm they fire real cartridges not caps.

Thank you

Jay
Hundy is offline  
Old February 25, 2013, 08:47 PM   #2
redrick
Senior Member
 
Join Date: December 5, 2007
Location: Virginia
Posts: 802
Here are 2 of my most recent revolvers from Uberti, both came from Taylor's & Co. I really like both of them. Fit and finish is excellent on both of them. I havn't had time yet to shoot them yet, but I sure like handling them.

Uberti Remington New Army.
Taylor's Smoke Wagon DE.

I want to get the 45 conversion cylinder for the Army, since I just ordered a reloaded after I saw the price of factory .45's.
Attached Images
File Type: jpg Remington 1858 & Rig 005.JPG (183.8 KB, 106 views)
File Type: jpg Uberti Smokewagon DE .45 001.JPG (164.5 KB, 119 views)
redrick is offline  
Old February 25, 2013, 09:14 PM   #3
Hundy
Senior Member
 
Join Date: February 23, 2013
Posts: 106
Uberti Single action pistols

Thank you for posting, I like the firearms you purchased, they look like what I am looking for also. I understand what you mean about handling. That is another reason I really like the look of thier products.
I would really like to hear how they fire, when you get the chance. I am also interested in Colt 45, I reload also, and that die is common.

Thank you

Jay
Hundy is offline  
Old February 25, 2013, 09:18 PM   #4
Aguila Blanca
Senior Member
 
Join Date: September 25, 2008
Location: CONUS
Posts: 5,945
Excellent firearms.
Aguila Blanca is offline  
Old February 25, 2013, 09:27 PM   #5
Bob Wright
Senior Member
 
Join Date: July 10, 2012
Location: Memphis, Tennessee
Posts: 1,708
Uberti makes two different models of these "old-time" revovlers, the cartridge conversions of cap-and-ball revovlers, and the Open Top models. The difference is that one was originall made as a cap-and-ball revovler, then converted to fire metallic cartridges. The other was made as a cartridge revovler from the start, using parts left over from older manufacture. This refers, of course, to the original Colts of the 1870 era. The Uberti guns are replicas of these, made without any further modifying.

I have no personal experience with either, but a friend of mine has a .38 Special Open Top. His gun is, as with all Ubertis, very handsome and well made. He shoots standard velocity .38 Special ammunition with no ill effect. And, yes, these are cartridge firing reproductions, even to being reproductions of guns that never quite existed.

But from all I've seen, these guns will hold up to standard velocity, or better yet, cowboy loads. The original design was somewhat fragile, and the modern made guns are no exception.

Use them for what they are meant to be, fun guns.

Bob Wright
Bob Wright is offline  
Old February 25, 2013, 09:54 PM   #6
dalegribble
Senior Member
 
Join Date: August 4, 2007
Posts: 858
i have 4 uberti pistoles that i love. the uberti 22 lr 6 shot stallion, i have 2 of the cattlemen 4 5/8" and 1 uberti thunderer, all in 45 lc. i love all of these guns, they are the blued and polished models and case hardened all have great fit and finish. they have the notched cowboy sights and all are very accurate, well balanced and probably the most natural pointing handguns i have ever shot. i look forward to adding the nickel cattleman and sheriffs model as i can afford them.

rugers are fine guns i own a few different models but the western style guns have modern actions, not a bad thing but not original. the uberti's are faithful to the original colt design. oh, and i prefer the 45 lc caliber over other calibers that are offered. try one, i don't think you will be sorry. i love them.
__________________
Waltzes with woofs
dalegribble is offline  
Old February 25, 2013, 10:23 PM   #7
Bob Wright
Senior Member
 
Join Date: July 10, 2012
Location: Memphis, Tennessee
Posts: 1,708
Well, shucks. I've just got to show mine off!



L. to R.: Stallion .22, Cimarron .44 Special, Flat Top Target .45 Colt.

Bob Wright
Bob Wright is offline  
Old February 25, 2013, 10:55 PM   #8
Buford_Tannen
Member
 
Join Date: November 5, 2012
Posts: 24
I have a .45 Ruger Vaquero. My son and I went to the range a couple weekends back with the Ruger, a S&W .357, S&W .40 and a 1911.

Guess which one had all the ammo we brought used up - the Ruger. A .45LC single action is a blast, easy to shoot and clean up afterward.

Uberti is more authentic - key now will be to find either one for sale at a reasonable price.

Last edited by Buford_Tannen; February 25, 2013 at 11:01 PM.
Buford_Tannen is offline  
Old February 26, 2013, 12:20 AM   #9
Crazy88Fingers
Senior Member
 
Join Date: November 20, 2010
Location: Florida
Posts: 930
I have a Cimarron Model P, which is an Uberti with some finishing touches done by Cimarron. I really enjoy the gun. One reason I went this route over a Ruger is the 4-click classic Colt action. It just ain't a single action .45 without it.



Plus, it isn't exactly hard to look at.
__________________
"And I'm tellin' you son, well it ain't no fun, staring straight down a .44"
-Lynyrd Skynyrd
Crazy88Fingers is offline  
Old February 26, 2013, 07:58 AM   #10
Hundy
Senior Member
 
Join Date: February 23, 2013
Posts: 106
Thank you

Thank you for all the feedback and imput. I pretty much feel the same way as displayed here. Firearms are not cheap, for me its a big purchase, so I just wanted to get feed back before buying. I feel I am going to make my next purchase a Uberti.

Thank you again for sharing

Jay
Hundy is offline  
Old February 26, 2013, 03:08 PM   #11
Bob Wright
Senior Member
 
Join Date: July 10, 2012
Location: Memphis, Tennessee
Posts: 1,708
crazy88fingers:
Quote:
I have a Cimarron Model P, which is an Uberti with some finishing touches done by Cimarron.
Such as? My .44 Special is a Model P from Cimarron, no special touches on mine.

Bob Wright
Bob Wright is offline  
Old February 26, 2013, 03:10 PM   #12
gak
Senior Member
 
Join Date: February 28, 2005
Location: Aridzona
Posts: 2,762
I love my Cimarron P in .44 Special. Take a look at the Uberti "El Patron" - available in .45 Colt. I was very impressed by one I saw at Bass Pro Shops. Very nice checkered walnut grips and CCH/blue finish. (Reminded me more of the Cimarrons in over quality) The ubiquitous "Cattleman" series, of which I think the El Patron is a part, seems to span quite a range of finishes and pricing,...I'd beware of anyone these days showing/claiming "the" Cattleman, especially if it's the lesser (matte/brass) finishes--frequently found at the big box stores--unless that floats your boat and pocket book. It'd been awhile since I looked at Bass (etc) and was surprised to find the above nice finish and grips there--at a "not unreasonable" price too.

IMO, unless you're hooked on the pre 1873 (aka Peacemaker) guns such as the '72 Open Top, 1858 Remington, 1851 etc, the '73's (SAAs/Cattleman) are a lot easier to handle and live with, and shooting a broader array of cartridges and loads.
Cimarron, Taylor's and Uberti itself all carry their own variation(s) on the "Cattleman" theme with different names, again with different finishes and features--some "custom" tuned at the factory ("Smokewagon" and such).

Last edited by gak; February 26, 2013 at 03:21 PM.
gak is offline  
Old February 26, 2013, 10:07 PM   #13
Crunchy Frog
Senior Member
 
Join Date: December 26, 2008
Location: Greenville, SC
Posts: 365
At the SHOT show Uberti introduced a new variant of the 1873 called the "Horseman" that features a transfer bar ignition with a half cock hammer, and coil springs. Might be worth a look.

I am a SASS shooter. Most of us use Rugers but I know a lot of folks who shoot Uberti revolvers. There are lots of variations and price points. There is a lot to like about them.

I was checking some LGS' for SA revolvers for some of our new shooters and found a local store selling the El Patron revolvers. I thought they had a nice finish and some good features for the price. If I was looking for a revolver that I could use "out of the box" without having additional action work done I would take a hard look at the El Patron.
Crunchy Frog is offline  
Old February 27, 2013, 08:39 AM   #14
Pianoguy
Senior Member
 
Join Date: September 15, 2011
Location: Wisconsin
Posts: 213
I don't have a lot of experience with SA revolvers, but I do have an Uberti Cattleman 4 1/2" in 45 colt that I bought on a whim. It love shooting it, it's pretty accurate and it handles real nice. It's fun loading and unloading the thing up one round at a time - just seems classier than cramming rounds into a magazine. I'd use it a lot more except the ammo is just too expensive (I don't re-load). I'm not sure just how they compare to others, for the price I would assume there are others that are better, but it seems pretty solid and looks nice. Never regretted buying it even though it's pretty much just a safe gun. Everyone should have one for the collection.
Pianoguy is offline  
Old September 28, 2013, 01:02 AM   #15
62coltnavy
Senior Member
 
Join Date: February 1, 2011
Posts: 203
Has anyone seen a Horseman for sale? I have a local dealer who didn't even know about them. They show up on the web site, but apparently not in the 2013 catalogue. Haven't seen one posted on Gun Broker either. It would be nice to load six.
62coltnavy is offline  
Old September 30, 2013, 12:21 PM   #16
Jim March
Senior Member
 
Join Date: February 14, 1999
Location: Pittsburg, CA, USA
Posts: 7,238
Pietta has been selling a transfer-bar ignition SAA near-clone as well of late. Pietta makes guns at least as good as Uberti by most accounts.

Either will usually look better than a Ruger and perhaps be more authentic - two-piece grip frame allowing for one-piece grips for example (no screw holding the grips together). BUT, in my opinion, a Ruger will hold up much better than anything Italian. By a mile. And if you are into modifying your hardware, can't beat a Ruger.

We won't even start with what I've done to what used to be a New Vaquero in 357 .
__________________
Jim March
Jim March is offline  
Old September 30, 2013, 02:56 PM   #17
Colt46
Senior Member
 
Join Date: November 25, 2002
Location: Campbell Ca
Posts: 579
The Ruger is superior

The Uberti is a clone of the original Colts. Ruger is a modern translation that will be far safer and more reliable than the Colt/clones.
That said, there is nothing wrong with the Uberti's and they are a fine revolver. They just fill a slightly different niche in the market than does the Vaquero.
I've got the Vaquero in .45 and love it.
Colt46 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10508 seconds with 8 queries