The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old February 21, 2013, 08:54 PM   #1
Moloch
Senior Member
 
Join Date: November 27, 2005
Posts: 1,304
Vernier target sight - annoying problem

I put an adjustable vernier target (TOW) sight on my BP rifle, its a great sight and everything but the problem is it folds down under recoil and I have to re-adjust it every shot which gets annoying quick.
It doesn't fold completely, but it moves so much that I have to re-adjust it every single shot.

I tried to tighten the screw that holds the sight on the base but it still folds down. Maybe the spring is too weak? - though a friends sight (different make) has the same problem.

Has anyone fixed that problem?

I thought about drilling a small hole through the side of the base and into sight itself to put a small pin in there so it can't move under recoil, but its just too small and fragile for that.

Thats the sight I'm talking about: http://www.trackofthewolf.com/Catego...2/RS-CREED-3-E

Any suggestions?
Moloch is offline  
Old February 22, 2013, 09:34 AM   #2
mykeal
Senior Member
 
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,765
Call Track of the Wolf and ask them how to fix it.
mykeal is offline  
Old February 22, 2013, 09:57 AM   #3
drcook
Senior Member
 
Join Date: November 25, 2009
Posts: 241
almost all, if not all move out of the locating detent on recoil. that sight is so close to your face and eye, that if it is rigid, you are going to get a bruise, cut or worse.

even my higher dollar MVA sights will come out of the detent when the big 45's go off.
drcook is offline  
Old February 22, 2013, 10:44 AM   #4
spitpatch
Senior Member
 
Join Date: August 31, 2009
Location: oklahoma
Posts: 165
sight

I think what is happening is normal. You just have to place it back in battery after each shot. If you have to make a wind or elevation change then something is loose or striped out.
spitpatch is offline  
Old February 22, 2013, 05:47 PM   #5
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,862
It's supposed to fold forward. It should not need adjusting after firing, just placed back in an upright position.
Hawg is offline  
Old February 23, 2013, 12:00 AM   #6
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 17,057
The fold up sight is probably too loose for the base it is attached to. Try shimming it with .001" shim.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:53 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07702 seconds with 9 queries