The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 17, 2013, 06:50 PM   #1
1GodManyGuns
Junior Member
 
Join Date: July 25, 2012
Posts: 4
Near max load with low pressure signs? 124gr 9mm LRN

Howdy! I just started reloading .223 last month and this month I made my first batch of 9mm. In working up my 9mm load, I noticed some low pressure signs half way through (I was too busy looking for signs of high pressure in the first half to notice the low pressure). There is fouling on the outside of the cases starting at the neck and collecting on the head of each case. When I moved up to my my next load the problem persisted. My Hornady manual gives a range from 4.0-5.0gr of Unique for a 124gr LRN. All the rounds fit in my LE Wilson C.O.A.L. checker and feed through the gun fine.

Should I be getting low pressure signs when I am this close to a max load, or am I doing something wrong? Should I go up to the max and continue over until I no longer get the low pressure signs?

What I'm using:
Gun: Sig p228
Brass: WIN 9mm LUGER on it's first reload
Primer: Winchester Small Pistol
Bullet: 124gr LRN from www.zcastbulletz.com
Powder: Unique (4.1gr, 4.3gr, 4.5gr, 4.7gr, 4.9gr)
Average Cartridge Overall Length: 1.157 inches

The pictures below show a case from each powder test in order from left to right (4.1-4.9). The two cases on the far right are factory ammo cases shot through my gun that day to use as a comparison to the reloads.




These are the cases in the same order, just turned around 180 degrees




This is the head of each case... No signs of high pressure that I see...

1GodManyGuns is offline  
Old February 17, 2013, 07:16 PM   #2
Adamantium
Senior Member
 
Join Date: June 6, 1999
Location: El Paso, TX
Posts: 992
I wouldn't worry about it, focus on the accuracy you are getting. You are already loading to 4.9gr. If you go up to 5 then you really haven't changed all that much.

Shooting cast lead is going to be dirty, there is just no way around it. I shoot several thousand cast lead bullets a year and my brass constantly looks like that.
__________________
New gun, same ol' shot.
Adamantium is offline  
Old February 18, 2013, 05:29 AM   #3
Hummer70
Senior Member
 
Join Date: June 22, 2009
Location: South Carolina
Posts: 142
I agree, don't worry about it. If it functions well drive on.
__________________
Distinguished Rifleman High Power & Smallbore Prone
President's Hundred (Rifle) US Palma Teams(2)
US Dewar Team (2),4 Man Natl.Champ Team SB Prone
Cert Test Dir. Sm Arms and Ammo,Aberdeen Pr Ground, Firefighter I, AC4HT
Hummer70 is offline  
Old February 18, 2013, 09:50 AM   #4
hoffbill
Senior Member
 
Join Date: February 15, 2009
Location: Texas
Posts: 240
I load 124gr plated all the time with 5 gr of Unique with no issues.
hoffbill is offline  
Old February 18, 2013, 09:52 AM   #5
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,791
You're near max load for lead bullets but you're no where near max for pressure. Besides that, at this point, you probably just have a dirty chamber.
__________________
Still happily answering to the call-sign Peetza.
---
The problem, as you so eloquently put it, is choice.
-The Architect
-----
He is no fool who gives what he can not keep to gain what he can not lose.
-Jim Eliott, paraphrasing Philip Henry.
Brian Pfleuger is offline  
Old February 18, 2013, 10:16 AM   #6
g.willikers
Senior Member
 
Join Date: September 28, 2008
Posts: 5,325
Those cases don't look like a low pressure problem to me.
They'd be a lot more blackened.
Just the usual grime from shooting Unique and lead.
__________________
Lock the doors, they're coming in the windows.
g.willikers is offline  
Old February 19, 2013, 08:48 PM   #7
1GodManyGuns
Junior Member
 
Join Date: July 25, 2012
Posts: 4
Thanks for all the advice. I'll stick with my best shooting load at 4.5 and be sure to clean more often.
1GodManyGuns is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06870 seconds with 7 queries