The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools
Old February 17, 2013, 02:57 PM   #1
Senior Member
Join Date: January 29, 2010
Location: Belews Creek, NC.
Posts: 618
H322 or H335 for 52gr 223 AR-15?

Which one of the (2) powders do you recommend? I'm leaning towards the H335.
t45 is offline  
Old February 17, 2013, 05:15 PM   #2
Ralph Allen
Senior Member
Join Date: January 21, 2007
Posts: 397
I have loaded both powders with good results, but I have a lot more H335 in stock, so that is what I use.
Ralph Allen is offline  
Old February 17, 2013, 05:36 PM   #3
Senior Member
Join Date: January 10, 2012
Posts: 2,507
H335 is the powder I use for all 223 rounds that I load.
rebs is online now  
Old February 18, 2013, 06:38 PM   #4
Join Date: October 5, 2012
Posts: 17
Load for my .223 Win 70 bolt gun. Started with H322. Very accurate. Went to get more and my shop was out. Used H335, worked that load up, very accurate. Went back for more and guess what, no H322 or 335. Picked up some Benchmark. Worked the load up and guess what, same. Loading 40g V Max, 50g Blitzkings. Don't see any difference in accuracy with any of these once I found the right load for my rifle. Guess I'll use what I can get.
RickAZ is offline  
Old February 18, 2013, 07:29 PM   #5
10 Spot Terminator
Senior Member
Join Date: January 3, 2008
Location: Central Oregon
Posts: 348
for the 52 gr bullet I give the edge to the H332. Most accurate in my 1 in 8 twist .223 and I did try the H335 with the 52 gr. pill and it too was good, just not AS good.
10 Spot Terminator is offline  
Old February 18, 2013, 09:27 PM   #6
Senior Member
Join Date: December 16, 2005
Location: Northeast TX
Posts: 1,139
The lighter the bullet the more the accuracy edge will go to H322.
bluetopper is offline  

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 11:20 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06992 seconds with 7 queries