The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old February 17, 2013, 08:56 PM   #1
David13
Senior Member
 
Join Date: November 2, 2012
Location: Los Angeles
Posts: 243
Mosin Nagant Safety Question

Should these 91/30s be head spaced before shooting for first time?
My neighbor has one and intends to possibly accompany me to the range next week to shoot it. He knows nothing about guns, let alone Mosins.
Can safety be determined by observation, or should it be gauged?
Thanks
dc
David13 is offline  
Old February 17, 2013, 10:23 PM   #2
tobnpr
Senior Member
 
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 2,964
Well...
You can only determine "safety" if something is so grossly evident that you can see it with the naked eye. Not likely, if it was purchased from a major firearms retailer.

Headspace, OTOH, cannot be checked visually. You will hear that Mosins rarely, if ever have headspace issues. That is likely true for re-arsenaled rifles. If it's unknown history, you have no way of knowing if someone has changed the bolt or bolthead at some point without verifying headspace.

And yes, I bought a Mosin that failed a no-go gauge...so I check them all.

I would buy, or borrow, a no-go gauge- or for worst case, safe-to-fire, a "field gauge" which allows even more slop.

It's not entirely scientific, but if your buddy won't cop for the $30 for the gauge, tape two pieces of cellophane package tape (usually about 2.5-3 mils thick) to the back of the rim of a piece of BRASS. Then chamber it, and slowly work the bolt closed.

But first- make sure the bolt isn't sticking excessively from cosmoline left in the action, chamber, or bolt. The Mosin doesn't have a particularly impressive bolt throw to begin with, and you don't want excessive resistance.

SLOWLY work the bolt closed. You should feel a significant increase in resistance about halfway down as the lugs begin to seat and press the rim against the chamber. If you don't feel this extra resistance, I would for sure, get a real no-go gauge.
__________________
Custom Bent Bolts and Gunstocks for the Mosin-Nagant
www.biggorillagunworks.com
tobnpr is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06617 seconds with 9 queries