The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 15, 2013, 01:06 PM   #1
Rebel
Member
 
Join Date: January 30, 2013
Location: West Chester, Ohio
Posts: 28
Loads per 1lb of powder

I have a question I've been wondering about and couldn't find an answer in the forums.

How many loads do you typically get out of a 1lb container of powder?

I realize this may very depending on what caliber you are loading for so some examples would be for say .223 and .45.

I'm still gathering the materials and knowledge to reload and wondered how much powder i should stocking up.

So far i have 1lb of IMR3031 for the .223 (colt AR) and 1lb of W231 for my XD 45.

Powders seems to be pretty easy for me to come by at my LGS so i can buy more if needed. Also if you have any powder recommendations I would be more then happy to hear your sugguestions. The calibers I plan to load are 380,9mm,38sp/357,45,223 and maybe 8mm mauser.

So far my main goal is just to be safe and to be able to shoot more often. Accuracy is not at the top of my list yet!
Rebel is offline  
Old February 15, 2013, 01:08 PM   #2
bullspotter
Senior Member
 
Join Date: November 2, 2008
Location: Montana
Posts: 304
One pound is 7000 grains. So devide your load into that. EX for 223 with a 25 grain load, 7000/25 = 280 rounds out of 1 lb of powder.
bullspotter is offline  
Old February 15, 2013, 01:09 PM   #3
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 11,078
The conversion is 7000 grains per avoidupois pound.
Divide 7000 by the charge weight out of your loading manual to determine the number of shots per pound.
Jim Watson is offline  
Old February 15, 2013, 01:36 PM   #4
Spammy_H
Senior Member
 
Join Date: September 17, 2009
Posts: 220
The rule of thumb that I use is 1000 rounds of pistol per pound of powder.

However, none of my pistol loads are anything above 5 grains, so my rule of thumb is conservative.

Rifle probably varies a lot more. I'd go with an average of 30 grains, because it seems to "swag" in the middle of the loads that I've seen for .22 - .30 caliber rifle loads = 230 (233) loads per pound. That roughly correlates with what the previous poster just said (280 per pound).

Maybe split the difference and go 250 per lb for rifle? It would be a good happy medium, and easy to remember (4x as many pistol rounds per pound than rifle).
Spammy_H is offline  
Old February 15, 2013, 01:49 PM   #5
Rebel
Member
 
Join Date: January 30, 2013
Location: West Chester, Ohio
Posts: 28
Thanks for the quick replys and the insight provided. I now know I need a lot more powder on hand!

Reason like this I decided to join such a knowledgeable forum! Thanks again!!!
Rebel is offline  
Old February 15, 2013, 05:49 PM   #6
chiefr
Senior Member
 
Join Date: January 27, 2010
Location: AR
Posts: 1,225
When I shot comp many years ago, my favorite load in 38Spl was 2.8 gr of Bullseye behind a 148gr WC. It was like a 1lb can would last forever. Doing the math, that makes for 2500 rounds.
chiefr is offline  
Old February 16, 2013, 07:28 AM   #7
Mike40-11
Senior Member
 
Join Date: January 8, 2005
Location: Missouri
Posts: 807
I wouldn't use rules of thumb. Do the math. 4.2 grains of Titegroup gets me 1667 9mm rounds out of a pound. But a pound of 4831 will only net me 87 .300 winmag loads. (80 grains)
Mike40-11 is offline  
Old February 16, 2013, 07:50 AM   #8
BigD_in_FL
Junior member
 
Join Date: December 20, 2012
Location: The "Gunshine State"
Posts: 1,981
Want to save money and ensure you have powder? Once you know what you want to use, buy it in 8# jugs. The price per pound is about half
BigD_in_FL is offline  
Old February 16, 2013, 08:27 AM   #9
Misssissippi Dave
Senior Member
 
Join Date: December 5, 2009
Posts: 1,407
Yea, 7000 grains per pound.

Bulk purchases are great for saving money only when you are very happy with the powder you are going to buy. Yes, you can dump that big jug of powder in the garden to be used as fertilizer you bought before knowing it doesn't do what you hoped it would. To me, it is a waste. I do have 1 pound of powder, minus a little, I plan to dump. It seems $16 to $25 per pound of fertilizer is rather high.
Misssissippi Dave is offline  
Old February 16, 2013, 09:23 AM   #10
4runnerman
Senior Member
 
Join Date: January 16, 2010
Location: Minnsota
Posts: 2,803
4.9 gns Unique behind a 250 berrys in 45 ACP. Got 8 lbs of it. Don't think I will be buying any more as long as i live any how. Well maybe one more 8 lb'er
__________________
NRA Certified RSO
NwCP- Performance Isn't Optional
4runnerman is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07800 seconds with 7 queries