The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: General Handgun Forum

Reply
 
Thread Tools
Old February 4, 2013, 11:12 AM   #1
jproaster
Senior Member
 
Join Date: November 14, 2010
Location: SE Tennessee
Posts: 214
1st leather holster- moves on belt

Just wondering how to keep galco stinger holster for a p238 from sliding on my 1.25 in. belt.

John
jproaster is offline  
Old February 4, 2013, 02:50 PM   #2
Dragline45
Senior Member
 
Join Date: November 30, 2010
Posts: 2,571
You might need a more heavy duty belt, one specifically made for carrying a holster. Several holster makers sell these belts in different width's and thicknesses. Maybe a thicker belt would prevent the holster from moving around so much.

Personally, I like a little movement. When I sit in the car I like to shift the holster to a different position to accommodate for sitting and to make it more comfortable.

Last edited by Dragline45; February 4, 2013 at 05:03 PM.
Dragline45 is offline  
Old February 4, 2013, 03:12 PM   #3
jproaster
Senior Member
 
Join Date: November 14, 2010
Location: SE Tennessee
Posts: 214
Dragline, I think that im already getting to understand your point of ability to shift holster positions.

To be honest i figured that having a pinned holster would make removing the pistol easier too. But my practice today shows that the holster is releasing pretty well and doesnt move along the belt during removal.

Maybe my query was premature.

Thanks for the help.

John
jproaster is offline  
Old February 4, 2013, 04:51 PM   #4
MTSCMike
Senior Member
 
Join Date: March 15, 2011
Location: Middle TN
Posts: 164
I have a Stinger for my LCP and love it. Play with belt thickness until you find one that makes it snug but still allows you to move it when wanted.
__________________
IDPA Member A00640
Founding Charter Member - Middle Tennessee Shooter's Club
MTSCMike is offline  
Old February 4, 2013, 11:49 PM   #5
jason_iowa
Senior Member
 
Join Date: July 30, 2011
Posts: 686
Galco makes a nice gun belt. My next belt will be from Bullhidebelts.com. I have never had one but I have been looking and they look like a superb belt to me.

I try to "pin" my holster between belt loops so that it can not slide much. Depending on what I'm wearing some are easier to keep from moving.

Dress pants I have a tailor do the belt loops so that my holster sits between 2 that are reinforced so that they don't tear off if my gun gets on something. Could do this with jeans as well but jeans typically have better belt loops then dress pants.

Honestly if you are going to carry concealed as a lifestyle an not a hobby I suggest finding a good tailor. He/she will soon become your best friend. Ill buy a pile of clothes and take them to the tailor and get a load done for 50-100 bucks. It may seem like kind of a lot to pay extra on your clothes but unless you have a wife who is a super seamstress or are one yourself its more then worth it.
jason_iowa is offline  
Old February 5, 2013, 12:23 AM   #6
wyodesertrat
Junior Member
 
Join Date: December 15, 2012
Posts: 4
I really like my wilderness tactical belt


Sent from my electronic trigger device using Tapatalk
wyodesertrat is offline  
Old February 5, 2013, 06:33 PM   #7
jproaster
Senior Member
 
Join Date: November 14, 2010
Location: SE Tennessee
Posts: 214
Thanks for the replies; im getting used to the fit, but will be looking into a belt made for this holster.

John
jproaster is offline  
Old February 7, 2013, 10:51 AM   #8
Gaerek
Senior Member
 
Join Date: October 3, 2012
Location: Arizona
Posts: 939
Is your belt a gun belt? I know some manufacturers make 1.25" gun belts. But really, if you have no need for the 1.25" belt (some people do...they need to carry and look dressy, etc) get a 1.5". That's really the minimum for a sturdy platform for your gun. Stay away from the department store when looking for gun belts. If you can fold part of the belt in half the long way, it's not nearly sturdy enough.

http://www.concealmentsolutions.com

They make several styles of gun belt. They even have a 1.25" variety, if you need it. It's made out of horsehide, which is heavier duty (and more expensive) than cowhide. I have one of their regular 1.5" cowhide belts and it works great.
Gaerek is offline  
Old February 17, 2013, 07:32 AM   #9
22Rimfire
Junior Member
 
Join Date: March 25, 2012
Location: Indiana
Posts: 8
Years ago, when I worked armed security, I had the same problem. I bought "belt stays" from my local Police uniform shop, worked great. Dont know if they still make them or not.
22Rimfire is offline  
Old February 17, 2013, 09:55 AM   #10
BlkHawk73
Senior Member
 
Join Date: January 14, 1999
Location: Maine
Posts: 744
Use a GOOD holster and an equally GOOD belt. Preferrably from the same maker. Myself, all mine come from Mitch Rosen. Perfect tight fit so there's no movement, no sag and perfect retention. Cheap out on either and you're getting what you pay for. The mass produced, production line stuff just never seems to offer the better fit.
__________________
Shoot safe, shoot often
BlkHawk73 is offline  
Old February 17, 2013, 10:35 AM   #11
FALPhil
Senior Member
 
Join Date: September 10, 2007
Location: Racoon City
Posts: 933
I have found that these make excellent gun belts at a fraction of the price of branded gun belts.
FALPhil is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09047 seconds with 9 queries