The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools
Old February 10, 2013, 08:15 PM   #1
J2.
Senior Member
 
Join Date: June 12, 2008
Location: The Real America
Posts: 149
Tube feeder?

I was discussing them with a friend when he mentioned he was going to polish the inside of the tube on a new Rossi Lever he just purchased, along with that he said he would do the spring as well. We also talked about the spring tension on the loading door. Can/should this be lessened?

What are your thoughts?
__________________
"Those who hammer their guns into plows will plow for those who do not."
J2. is offline  
Old February 10, 2013, 08:19 PM   #2
PawPaw
Senior Member
 
Join Date: December 24, 2010
Location: Central Louisiana
Posts: 3,108
I suppose that if he wants to polish the inside of his mag tube, that would be okay. I don't know anything that prohibits it. Generally, if it's clean, it's good.

Yes, the spring tension on the loading gate can be reduced, but you've got to know what you're doing. That's a leaf spring and it's not like snipping off a bit of circular spring.
__________________
Dennis Dezendorf

http://pawpawshouse.blogspot.com
PawPaw is offline  
Old February 13, 2013, 03:06 PM   #3
Ozzieman
Senior Member
 
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 4,922
Having a Rossi maries leg I have not had any problems with mine. It functions well and has never been an issue.
I totally agree with PawPaw, its ok but why?
As far as the loading door, mine doesn’t have an issue with spring tension. The issue with it is the sharp edges on the frame. After shooting 20 rounds or more I have to use another round to push it in all the way.
__________________
“Peace is that brief glorious moment in history when everybody stands around reloading.” – Thomas Jefferson.

Politician's are like diapers.
You need to change them often,,,,, for the same reason!
Ozzieman is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07104 seconds with 9 queries