The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 11, 2013, 10:00 AM   #1
Eppie
Senior Member
 
Join Date: January 7, 2010
Location: Houston, TX
Posts: 795
Tracking "age" of brass

Hi Guys,
I'm reloading for .308 precision shooting. I know that eventually I'll have to buy Norma or Lapua brass, but I've got a couple thousands of FGMM cases to use for now.

I've shot some of them twice and some only once so I can still tell the difference. Now I'm thinking about a system to track how many times they are reloaded. I was thinking of a color coding system whereby a would put a little dot of nail polish on the primer, since there are so many colors the case would go to scrap long before I ran out of colors. But I'm afraid that the nail polish would get blown off or cause some other problem in the action.

What system do you guys use?
__________________
"Socialized Medicine is the Keystone to the Arch of the Socialist State.” -Vladimir Lenin
"I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them." - Thomas Jefferson (An early warning to Obama care)
Eppie is offline  
Old February 11, 2013, 10:03 AM   #2
Brian Pfleuger
Staff
 
Join Date: June 25, 2008
Location: Central, Southern NY, USA
Posts: 18,369
Ziplock bags, coffee cans or chinese food take-out containers labeled "Once Fired", "Twice Fired"...
__________________
Still happily answering to the call-sign Peetza.
---
The problem, as you so eloquently put it, is choice.
-The Architect
-----
He is no fool who gives what he can not keep to gain what he can not lose.
-Jim Eliott, paraphrasing Philip Henry.
Brian Pfleuger is offline  
Old February 11, 2013, 10:11 AM   #3
serf 'rett
Senior Member
 
Join Date: June 25, 2009
Location: Stuttgart
Posts: 1,284
Ziploc is the simple solution. And a permanent marker.
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part.
serf 'rett is offline  
Old February 11, 2013, 11:16 AM   #4
Magnum Wheel Man
Senior Member
 
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 8,105
I use the 50 & 100 round plastic boxes & write my recipe on a piece of masking tape on the cover... I write the brand of case, & how many times reloaded ( along with the date loaded ) along with the rest of the info on new tape each time I reload... the brass is prepped in those 50 - 100 round lots on ammo I'm trying to make more accurate than factory... I pretty much write the times loaded with everything I reload, exception being my CAS ammo, as I often don't get the same cases back, so that ammo is mixed brand, & no "times reloaded" on my recipe sheet...
__________________
In life you either make dust or eat dust...
Magnum Wheel Man is offline  
Old February 11, 2013, 04:10 PM   #5
rclark
Senior Member
 
Join Date: February 12, 2009
Location: Butte, MT
Posts: 1,614
Yep, I use the 50, but mostly 100 round plastic boxes as well. Mark on a label on the box how many times the cases in the box have been reloaded. I use the o' |||| system with a slash to make five times and so on. Cases never migrate from the box for the life of cases. Simple and easy.
__________________
A clinger. When guns are outlawed, only outlaws will have guns. Single Action .45 Colt (Sometimes improperly referred to by its alias as the .45 'Long' Colt or .45LC). Don't leave home without it. Ok.... the .44Spec is growing on me ... but the .45 Colt is still king.
rclark is offline  
Old February 11, 2013, 06:29 PM   #6
griz
Senior Member
 
Join Date: July 31, 2000
Location: Middle Peninsula, VA
Posts: 1,428
You can color code with a sharpie (available in red, blue, black, etc) on the primer and it will stay on there until you deprime. It's handy to separate them if you just pick up a bunch, and there is nothing on the case that needs to be redone.
griz is offline  
Old February 11, 2013, 06:37 PM   #7
m&p45acp10+1
Senior Member
 
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,307
I just load for a bolt action. I load till they need to be trimmed, or the primer pockets feel loose. Then they go to the recycle can. That is for bottle necked brass. I have some .221 Rem Fireball that have been reloaded more times than I can count. I inspect them well before loading them.

Pistol brass gets loaded till it splits.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.
m&p45acp10+1 is offline  
Reply

Tags
brass sorting , case sorting

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08079 seconds with 7 queries