The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 5, 2013, 01:07 PM   #1
rbaum1
Junior Member
 
Join Date: January 29, 2013
Posts: 1
.257 Roberts

I am new to the forum and I want to thank you for any assistance ahead of time! I am trying to reload .257 roberts w/ 117gr from Hornady. I only have two types of powder at my disposal right now (vht-n133 and cfe223) can i reload the 257 with these powders SAFELY? Any suggestions?
rbaum1 is offline  
Old February 5, 2013, 01:31 PM   #2
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 9,555
I don't know anything about the powders you mentioned. (Can't find it in any of my reloading manuals).

But I do know, just because a powder is "safe" doesn't mean its right for the round you're reload.

Not saying its safe, I don't know, just saying there are better powders for the 257 Roberts.

I hunt and do a lot of shooting with my 257 Roberts, It really likes (as do most 257 Roberts) medium burning powders. Such as 4895, 4064, 3031, etc etc.

I'd stick to powders recommended in reloading manuals but that's just me. The 257 Roberts is an excellent round, you want to keep it that way.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School Oct '78
Distinguished Rifle Badge 1071
kraigwy is offline  
Old February 5, 2013, 02:41 PM   #3
Slamfire
Senior Member
 
Join Date: May 27, 2007
Posts: 4,133
Quote:
I hunt and do a lot of shooting with my 257 Roberts, It really likes (as do most 257 Roberts) medium burning powders. Such as 4895, 4064, 3031, etc etc.
Have you tried Varget or IMR 4350?. I have way too much 4350 and hope it will work well, but I am curious to find others experiences in the 257 Roberts. I have some Varget.

I will start reloading once brass becomes available. I have one box of 20 cases and that is not enough for load development.
__________________
If I'm not shooting, I'm reloading.
Slamfire is offline  
Old February 5, 2013, 10:23 PM   #4
Colorado Redneck
Senior Member
 
Join Date: January 6, 2008
Location: Northeast Colorado
Posts: 1,138
rbaum--you would do yourself a big favor by getting your hands on a couple of good hand loading manuals. Finding loads on the internet is always a dicey proposition. If nothing else, get the "Loadbooks USA "257 Roberts" Reloading Manual" This provides data from most manufacturers of powder and bullets, specifically for the 257 Bob.
Colorado Redneck is offline  
Old March 10, 2013, 08:57 PM   #5
EcoRover
Junior Member
 
Join Date: March 10, 2013
Posts: 3
4350 good Roberts powder

I experimented with a lot of powders over the years in my '81 257 Featherweight. Settled on 4350 for accuracy and velocity. Since switching to Barnes copper bullets, I use only 100-grain in the Roberts. They are long, come out smoking (probably shouldn't tell you I use 50-gr loads), and perform perfectly (100% wt retention) in elk. Never found one in an antelope or mule deer.
EcoRover is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07355 seconds with 7 queries