The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old December 14, 2012, 05:14 PM   #1
zbones6
Member
 
Join Date: December 29, 2011
Posts: 91
Scoping a Yugo M48

Hey guys. Im getting a Yugo M48 Mauser for Christmas, and I'm interested in scoping it. I'm going to test it out for accuracy, but i intend on putting a scope on it. I know they have mounts you drill and screw into the receiver, but i really dont want to permanently alter the weapon. I know Jmeck makes scope mounts for the Mosin Nagant that wraps around the chamber, do you know if anybody makes something like that for the Mauser? Or can i use one of those for my Mauser? I definitely do not want a scout mount. Thanks in advance.
zbones6 is offline  
Old December 14, 2012, 06:29 PM   #2
wpsdlrg
Senior Member
 
Join Date: August 18, 2009
Posts: 452
The "clamp-on" type, which "wrap around the receiver" as you describe, are unreliable. They WILL slip at some point, altering the zero of your rifle.

For the M48, your only GOOD choices are a LER ("scout" type mount)....or conventional drill and tap mounts for the receiver. Any other types are a poor compromise, at best.

One company (I can't remember the name) used to make a cantilevered mount, which attached to the rear sight base on the barrel (a la the scout mount), but projected to the rear, to allow scope mounting above the receiver. However, they are out of business, AFAIK.
wpsdlrg is offline  
Old December 15, 2012, 07:49 PM   #3
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,179
If you go the drill and tap route, select two piece mounts. The one piece usually are made for the full length "standard" Model 98 action and (probably) won't fit the M48 Yugo.

Jim
__________________
Jim K
James K is online now  
Old December 18, 2012, 05:30 PM   #4
Clemson
Senior Member
 
Join Date: March 9, 2001
Location: Greenwood, SC
Posts: 820
The Leupold Standard one-piece mount for the Model 98 works fine on the M48. I use them preferentially on the Intermediates.

Clemson
__________________
NRA Endowment Member, NRA Certified Instructor
CWP Holder
US Army veteran
Gunsmith www.boltandbarrel.com
Clemson is offline  
Old December 20, 2012, 08:58 AM   #5
firewrench044
Senior Member
 
Join Date: July 9, 2007
Location: Fort Pierce, Florida
Posts: 187
PA Distrbibuting has the correct scope mounts ( ZRAK ) used on
the Yugo M48 snipers
they also have ZRAK scopes
firewrench044 is offline  
Old December 24, 2012, 01:26 AM   #6
Sevens
Senior Member
 
Join Date: July 28, 2007
Location: Central Ohio
Posts: 8,578
I can't help with your wishing to mount a scope but I can offer just a SMIDGE of help -- in reassuring you that your initial idea that going with a LER "scout" style forward scope sucks. Been down that road, wasn't at all happy with it and it's not a cheap venture for something you do NOT like.

You get the bonus of the rifle looking ridiculous as a side order.

So that's my help -- follow your instincts and avoid the "scout" scope.
__________________
Attention Brass rats and other reloaders: I really need .327 Federal Magnum brass, no lot size too small. Tell me what caliber you need and I'll see what I have to swap. PM me and we'll discuss.
Sevens is offline  
Old February 11, 2013, 03:23 PM   #7
I'vebeenduped
Senior Member
 
Join Date: January 2, 2013
Location: AZ
Posts: 200
A bit late but...

here you go.

http://brassstacker.com/MAUSER/
__________________
The natural state of man, the way G‑d created us, is to be happy.
Look at children and you will see
I'vebeenduped is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:29 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07154 seconds with 9 queries