The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 4, 2013, 08:22 PM   #1
Bubba the Roach
Member
 
Join Date: April 20, 2011
Posts: 29
small mag rifle primers

so the shortage of primers is pretty bad, when you can find them people want upwards of $70 for a case. I found some CCI smr for $39 so i bought them. I normally use them for .223 and also .357mag. My question is what affect will this have on my loads. I reload for Mini 14 ranch, mossberg MVP and .357mag taruaus tracker 4in bbl. I never load hot usually around 25gns of w748 or cfe223 for 55gn bullets. For .357mag around 14gn w296 158gn bullets Thanks for the input

Last edited by Bubba the Roach; February 4, 2013 at 08:24 PM. Reason: forgot bullet weights
Bubba the Roach is offline  
Old February 4, 2013, 09:14 PM   #2
amathis
Senior Member
 
Join Date: March 20, 2009
Location: Champlain Valley, Vermont
Posts: 159
Always start low and work up. Don't swap primers unless you already have a load you personally have tested.

I typically start out with 10% less powder and work back up.
amathis is offline  
Old February 4, 2013, 09:28 PM   #3
m&p45acp10+1
Senior Member
 
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,323
If you were using magnum primers before then you may end up having to increase a slight bit on the ,223 loads. Though I would advise backing the powder off a half grain, and working up from there.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.
m&p45acp10+1 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06117 seconds with 9 queries