The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools
Old January 6, 2013, 01:31 AM   #1
mesabi
Senior Member
 
Join Date: December 26, 2007
Posts: 370
SPS tactical

So I am feeling like it is time to make my SPS tactical my own. Currently it is stock with Leupold rings, bases, and a mueller apv. I like the feel of the Hogue stock however, it has no bedding and is not free floating. The x-mark trigger is leaving something to be desired.

I am torn between B&C, HS, and AICS. I like the look of the AICS and I have not heard one negative review. I do have a question I have not found an answer for. Can the rifle be single loaded with those mags or is it too much of a hassle? The B&C of choice would be the m40 in OD and the HS would be the m24 stock. I could always add CDI bottom metal for those, but not at the top of the list of things to do.

As far as rings and bases, what have you guys had the best luck with? I hear a lot of EGW. I do not feel like I have the need for the 20 MOA rail yet. Are there any reasonably priced one piece rings and bases that work well?

Trigger, I am looking at the Timney flat trigger. David Tubb talks highly enough about them, but I have never seen anyone running one. Anyone have any experience?

The scope I do believe to be decided. The Weaver tactical 5-15 with mil adjustments. Again, anyone else have any experience to sway my interest elsewhere?
mesabi is offline  
Old January 6, 2013, 09:59 AM   #2
Chet Punisher
Member
 
Join Date: November 25, 2012
Posts: 81
You can check out my blog, but I am no expert and am learning as I go.

I'm 90% sure I'm gonna get the B&C M40 (#1000)... Is there a reason you want to update the scope? Are you unhappy with it? Or did it come on the rifle when you bought it? I have the EGW 20 MOA HD bases... They are pretty nice.

I went with the Bushnell Elite Tactical scope. It is a budget scope, but came with a lot of great reviews.

Keep us up to date on your project...

Here is another forum for you:

http://www.700rifle.com/forums/viewforum.php?id=11
__________________
My Blog: http://accurateshooting.blogspot.com/
Chet Punisher is offline  
Old January 6, 2013, 11:21 AM   #3
mesabi
Senior Member
 
Join Date: December 26, 2007
Posts: 370
It was a great budget scope however, I am not needing the price to be first determining factor anymore. It has worked great on my CZ, Remington, and I have full confidence it will work great on a sporter weight .308 I get someday. Perhaps if I worked up the courage to have my bubba Springfield drilled and tapped it could sit on there.
mesabi is offline  
Old January 31, 2013, 10:22 PM   #4
buerg55e
Junior Member
 
Join Date: February 22, 2008
Location: W. CO
Posts: 1
Timney trigger

The AICS stock looks nice but $1100 stock on a 700$ gun makes me laugh at the idea of buying one.

On another note...
I dropped a timney trigger in my SPS today and I'm having trouble with it. Went in easily but where the bolt has been fully engaged with the stock trigger the timney hammer won't throw, I have to ease the bolt handle back up just tenths of an inch before it completes firing....any ideas???
buerg55e is offline  
Old February 1, 2013, 12:43 AM   #5
allaroundhunter
Senior Member
 
Join Date: May 6, 2012
Location: Southeast Texas
Posts: 1,670
The thing about the AICS stocks are, you either love 'em, or you hate 'em. I have never met anyone that said, "Eh, it's okay."

My opinion is that the AICS is a rather large stock.... and I think 20" barrels in an AICS chassis just looks silly... But that's just me

I personally would rather put it in a McMillan and have it bedded for less cost (and McMillan's look nicer IMO).

What is your budget for a scope? How far do you intend to shoot the gun? What applications (i.e. range gun, tactical competition)?


Quote:
On another note...
I dropped a timney trigger in my SPS today and I'm having trouble with it. Went in easily but where the bolt has been fully engaged with the stock trigger the timney hammer won't throw, I have to ease the bolt handle back up just tenths of an inch before it completes firing....any ideas???
Those triggers are supposed to be "drop in" fits. It giving you that problem is an AD waiting to happen, IMO. You should take it to a gunsmith to have it looked at before you take it to the range.
allaroundhunter is offline  
Old February 1, 2013, 02:00 PM   #6
Saltydog235
Senior Member
 
Join Date: October 20, 2010
Location: Pawleys Island
Posts: 1,168
So your choices are a $250.00 stock, a $400-500.00 stock and a $1,100.00 stock. I'd do some more research on that aspect. For the rifle you have, a B&C Medalist in one of its configurations with a Wyatt Outdoor Mag Kit would probably serve you beyond what you need.

One piece base ring combo with a 20 MOA, a DNZ might fit the bill, really robust and lightweight.

Timney triggers are awesome. I put one in my project rifle for last year and it was a vast improvement over the junky X-mark/pro/whatever crap that comes on it.

I just bought a Weaver 3X15X50 EMDR Tactical scope a few weeks ago. First impression is that if I run out of bullets I can use it to bludgeon someone to death with or pound stakes into the ground. The glass is clear at all magnifications. The reticle is FFP and pretty nice. The illumination is pretty good but tends to get heavy and a little distorted when turned all the way up especially if the magnification is all the way up. Turrets have positive adjustment and are decent. The only thing I haven't liked is the windage turret has a little play in it when locked down. This is probably an adjustment issue and I'll get it corrected when I finally mount it as I haven't done that yet. This is going on my project gun for the year. The set up I have described is the one I am doing to mine.

The stock will be dipped in the old Mossy Oak Bottomland pattern and the metal work will be Duracoated in the WWII Olive Drab color.
Saltydog235 is offline  
Old February 2, 2013, 05:09 PM   #7
5R milspec
Senior Member
 
Join Date: December 11, 2009
Location: South Carolina
Posts: 360
Ok the stock does have bedding,its made out of aluminum so it doesn't need to be messed with.I ounce had one LA for a rifle I no longer have.The one I had was a Full Length ( not the short one ) I loved that stock but choose to move onto something else.

I see no reason not to just go ahead and get a 20 MOA base.Buy ounce and be done with it I say.Plus it shouldn't hurt a thing already having it on the rifle.

Timney I have to say myself is somewhat over rated.The one that came on my sons rifle feels good but will let the pine fall when standing up.Called them and they said it was the nature of the trigger,told them no way,and have been told from many other the same.Ounce I can find an alen wrench I will adjust the sear to make it right.Now he just makes sure not to hold the rifle standing up and take the safety off.

other than that you should be OK in my book.But if you want to get rid of the stock I'll be glade to take it from ya,for I have a build coming up and my use it.
__________________
life is great but its better when you can own as many guns you wish to own.for me I haven't bought enough yet.

Last edited by 5R milspec; February 4, 2013 at 12:20 PM.
5R milspec is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:39 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07746 seconds with 9 queries