The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 5, 2013, 01:18 PM   #1
rebs
Senior Member
 
Join Date: January 10, 2012
Posts: 2,228
need a little help

I shot these groups this morning all were loaded with H335, LC case and cci400 primer through a 16" 1 in 8 twist AR. The bullets are all 55 gr and include Dogtown hp, Nightmare varmint x-treme and fmjbt. The distance was 100 yds. Some of these groups are very close so how would you decide which is the best load for each bullet ?
rebs is offline  
Old June 5, 2013, 01:56 PM   #2
n5lyc
Senior Member
 
Join Date: February 11, 2009
Posts: 170
Show off.....

Good shootin' there Tex!

Seriously, 5 rounds of each won't tell you everything.
Since they are all pretty good groups, I would try the same loads at other ranges (both closer and farther than 100) holding with the same point of aim, to see which if any holds the flattest trajectory.

Then maybe shoot later in the evening, see which one has the least amount of muzzle flash.

Beyond that, choose the one that gives the best performance with those factors figured in.

(at typical AR engagement ranges, it don't make much difference if you get shot with a round traveling at 3300fps or with a round traveling 3200fps.)

Ian
n5lyc is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:11 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05736 seconds with 9 queries