The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old April 19, 1999, 03:39 PM   #1
AR Man
Member
 
Join Date: February 6, 1999
Location: Behind Enemy Lines Kalifornia
Posts: 47
Local gun shop has Mossberg 590's on sale $279.99 9 shot synthetic stock will take 2 3/4 & 3" shells. Barell heat shroud also. I have no experience with this gun. Good? Bad? Any body know? I have heard that it is the same version that the US military is issued (don't know for fact just what I heard) any information would be greatly appreciated. BTW is that a good price? Thanks

AR
AR Man is offline  
Old April 19, 1999, 03:59 PM   #2
Harley Nolden
Staff In Memoriam
 
Join Date: January 8, 1999
Location: Brunswick,GA USA
Posts: 1,884
ARMAN:
The MOssberg, for the money is a good gun. I have one issue on this piece, and that is the safety is made of plastic. There are after market metal safties that will replace the plastic.

A couple of Authors, this forum, had experienced difficullties with pump action operation. Sticking not going smoothly, however, from what I understand they resolved these problems.

Presonnally I prefer the Rem 870, doesn't have the bells and whistles, shrouds etc, but it does have a follower that is hard to jam. When the Mossberg jams, with a round half out of the mag. tube, it is a bugger to free-up.

HJN
Harley Nolden is offline  
Old April 19, 1999, 04:01 PM   #3
Mike Baugh
Senior Member
 
Join Date: October 28, 1998
Location: Indiana
Posts: 405
AR Man , I just picked up the same shotgun about 2 weeks ago . I have always used Remington but I have an 870 Police that has been at the factory since I bought it 2 months ago and they have no idea when I will get it back . So to show my displeasure I picked up the 590 just to have an extra shotgun , I like it better than the Remington , it pumps smoother , patterns better and kicks less . I paid $299 for mine so I think you found a good price . The military version [590A1] does not have the heat shield , has a thicker barrel , metal trigger guard assembly and metal safety button , it also runs an extra $100 . I have a friend that is a training officer for a local PD , they just bought 6 of the 590A1's and after shooting them they said they would never use Remington again [they have used 870's for years] . Before I get yelled at I do have an 870 Marine Magnum that I love , and I have Remington hunting shotguns , but they are not the company they used to be . One thing I did put on my 590 was the metal safety button from Brownells , I doubt the plastic one would give you any trouble , the one on my 835 turkey gun has worked fine but I was ordering parts and thought I would try one . Good Luck ,Mike...
Mike Baugh is offline  
Old April 19, 1999, 08:07 PM   #4
Spectre
Staff Alumnus
 
Join Date: October 23, 1998
Location: DC
Posts: 3,274
Buy one. Remove the barrel shroud.

I just bought a M500 Persuader with parkerized finish, ghost ring sight and 18" barrel at Wally World. I paid 318, and thought I did okay...
Spectre is offline  
Old April 19, 1999, 09:06 PM   #5
Grayfox
Senior Member
 
Join Date: December 17, 1998
Posts: 1,885
I've owned a 590 for about three years now. I've never had the first hint of a problem. It's made me a believer in Mossberg.
Grayfox is offline  
Old April 20, 1999, 09:18 AM   #6
jimmy
Senior Member
 
Join Date: January 29, 1999
Location: Texas
Posts: 1,795
One factor that's influenced my shotgun buying recently is that Mossberg has its own service department. Remington, unbelievebly, got rid of theirs, so anything going back to Remington is farmed out to a "warranty station." (If the service situation at Remington has improved, someone please let me know!)
jimmy is offline  
Old February 10, 2013, 03:14 PM   #7
Lynx76
Junior Member
 
Join Date: May 9, 2009
Posts: 3
Mossberg 590A1

I just purchased my Mossberg 590A1. It has a metal trigger guard and safety. Yes you can get a heat shield for the 590A1. Just go to Mossberg customer sight and order one, they cost less than $50. I am now getting rid of the synthetic stock and forearm and putting on wood, I hate the feel of the synthetic.
Lynx76 is offline  
Old February 10, 2013, 08:41 PM   #8
breakingcontact
Junior member
 
Join Date: October 25, 2012
Location: Austin, TX
Posts: 736
Quote:
Local gun shop has Mossberg 590's on sale $279.99 9 shot synthetic stock
Are these used? That's very cheap. I'd get the actual model number before laying the money down.
breakingcontact is offline  
Old February 10, 2013, 09:23 PM   #9
kutz
Senior Member
 
Join Date: September 24, 2012
Location: New Mexico USA
Posts: 333
M590A1

I Really like my M590A1,all metal, heavy barrel.
kutz is offline  
Old February 11, 2013, 11:20 AM   #10
MagnumWill
Senior Member
 
Join Date: March 18, 2009
Location: Central Colorado
Posts: 700
Sounds like the OP's talking about a 590SP. A used A1 still runs about $350, on a good day. I've had a 590 and it was great. Sold it for a 590A1, which I'm a lot happier with (speedfeed stock, ghost rings, 18.5" over 20", so less front heavy). Solid gun. It makes me hesitate on any other pump gun.
__________________
Generally speaking holes in anti-gun theories are called "facts."
-Madcap_Magician
MagnumWill is offline  
Old February 11, 2013, 11:25 AM   #11
Lee Lapin
Senior Member
 
Join Date: September 7, 2004
Location: SE NC
Posts: 1,238
Are these used? That's very cheap.

That's 1999 prices - note the date on the OP...

Zombie thread....
__________________
Mindset - Skillset - Toolset. In that order!

Attitude and skill will get you through times of no gear, better than gear will get you through times of no attitude and no skill.
Lee Lapin is offline  
Old February 11, 2013, 12:43 PM   #12
breakingcontact
Junior member
 
Join Date: October 25, 2012
Location: Austin, TX
Posts: 736
Thanks! Excellent point. 1999! That's like 50 years ago.
breakingcontact is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08509 seconds with 9 queries