The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 2, 2013, 12:08 AM   #1
4T4MAG
Senior Member
 
Join Date: April 28, 2009
Posts: 143
Berger 250 grn Elite Hunter seating depth

I thought I would try the Berger 250 grn Elite Hunter in my .338 Win Mag Browning A-bolt. I am having an issue with seating depth. My brass is trimmed to length, loaded with a starting load of 63 grn of Ramshot Hunter. In the picture provided, the loaded case is loaded to the max COAL 3.340. In comparison, the 250 grn tip shows one faint perpendicular band where it would be resting on the lands. Did I do something wrong? Or is there not enough free bore on my browning to use these 338 Elite Hunter tips? They are not the VLD and are said to be compatible with SAAMI spec chambers.
Attached Images
File Type: jpg Berger 250 Elite Hunter.jpg (232.5 KB, 2 views)
4T4MAG is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05424 seconds with 10 queries