The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools
Old January 29, 2013, 11:21 PM   #1
sarge1967
Member
 
Join Date: March 31, 2011
Posts: 16
Looking at a Rossi 92 in .357. Is it a good idea?

I have been wanting a .357 lever gun for a long long while now. I keep on reading or hearing bad stuff about Marlin's new guns, Winchester are out of my price range and Rossi seems to be hit or miss. Any advice as to what to look for before buying one? I think I will go Rossi I just don't want a lemon.
sarge1967 is offline  
Old January 30, 2013, 04:58 AM   #2
warnerwh
Senior Member
 
Join Date: February 11, 2009
Posts: 278
Just examine the Rossi before you buy it. Make a check list. I'm very pleased with both of mine but did check each first. I'd do the same with the Marlin too.
__________________
Portland, Or
warnerwh is offline  
Old January 30, 2013, 05:19 AM   #3
Hawg Haggen
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,419
The main thing about Rossi is some of the older ones can be a little rough out of the box. You can have an action job done on it but I just filled the action with white lithium grease and worked it a couple of hours. Its slicker than snot on a porcelain doorknob now. Mine is a 44-40.
Hawg Haggen is online now  
Old January 30, 2013, 06:46 AM   #4
sarge1967
Member
 
Join Date: March 31, 2011
Posts: 16
What do I check for? I know fit and finish, but what problems do I look for in the action?
sarge1967 is offline  
Old January 30, 2013, 01:46 PM   #5
mike7.62
Member
 
Join Date: May 25, 2012
Location: Down South
Posts: 85
My lgs had a rossi 92 357 mag instock I went 3 or 4 times looking at It. I had read so many bad things about them not working. I checked It out as best I could in the store and It seemed find. so I bought It 2 days ago, I'm glad I did to, ran great out of the box .38 & .357 mag. both. After a good cleaning It smoothed out even better. It's not a winchestor but for $460.00 It's hard to beat.
mike7.62 is offline  
Old January 30, 2013, 02:28 PM   #6
Mr. Whimsy
Senior Member
 
Join Date: February 9, 2010
Posts: 147
Take some metal 'snap-cap' cartridges and see if they will cycle/chamber. My Rossi appeared perfect - until I actually tried running cartridges through it and it would jam, jam, jam.

No more for me, Taurus.

IMHO, a certain percentage are kit guns. But some guys like to tinker and this is acceptable to them.
Mr. Whimsy is offline  
Old January 30, 2013, 02:41 PM   #7
Woody55
Senior Member
 
Join Date: June 19, 2012
Location: East Texas
Posts: 407
Mine has a March appointment with a gunsmith who specializes in those things.

In the mean time, it fired the .38s I had just fine.

I had a mixed bag of .357s and some went in fine, some needed a little encouragement and some didn't want to feed at all.

I think I'll need to experiment, keep some records and decide what overall cartridge lengths and shape bullets work best. Then I'll get the reloading process set up that way.

It's accurate enough. No kick at all. The action has a bit of extra resistance as you finally fully close the bolt and just before it is fully open. No big deal. Can't tell what the wood is, but it's for walking around so I don't care.
Woody55 is offline  
Old January 30, 2013, 06:25 PM   #8
smee78
Senior Member
 
Join Date: July 14, 2008
Location: South Carolina
Posts: 868
I have two of the older Rossi/Interarms models in 357 & 45LC and they are great, no complaints here. Mabye the previous owner worked out any bugs it had? Mine are the pre safety guns and I wont be getting rid of them any time soon. If you do get one and cant get it working right then this is the guy to send them to (http://stevesgunz.com/) every where you go asking about a Rossi lever gun you will see Steve's name pop up as the go to guy for all things Rossi/lever.
__________________
We know exactly where one cow with Mad-cow-disease is located, among the millions and millions of cows in America, but we haven't got a clue where thousands of illegal immigrants and terrorists are
smee78 is offline  
Old January 30, 2013, 08:19 PM   #9
Striker1
Senior Member
 
Join Date: May 22, 2004
Location: TX
Posts: 630
I have the EMF 20" Model 92 built by Rossi. After 8 years I have never had a problem with function.
Striker1 is offline  
Old January 30, 2013, 09:28 PM   #10
hard3
Junior Member
 
Join Date: March 13, 2011
Posts: 8
had 1 a few years ago worked great right out of the box. Ran 1000's of 38 specials out of it. would even feed double end wad cutters .Wish I had it back lost in DIVORCE.
hard3 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:31 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08987 seconds with 9 queries