The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: General Handgun Forum

Reply
 
Thread Tools
Old December 5, 2012, 02:22 AM   #1
9mm
Senior Member
 
Join Date: January 9, 2011
Location: Land of the Free
Posts: 2,720
Worst Gun You Ever Owned? Still Own.. ?

What is the worst gun you own/still own today?

I would say this us made revolver co. Family thing, never fired, I keep it in the safe, removed some rust and thats about it. So it's junky. Haha
__________________
See user title
9mm is offline  
Old December 5, 2012, 07:45 AM   #2
CPO15
Senior Member
 
Join Date: June 6, 2010
Location: Near Fincastle, VA
Posts: 109
Still have my Jennings .22, still have all my fingers....
CPO15 is offline  
Old December 5, 2012, 08:02 AM   #3
Uncle Billy
Senior Member
 
Join Date: June 10, 2009
Location: Small city in New York
Posts: 482
A Herter's .44 Magnum Colt SAA knockoff. It was made in Germany, I think, with the sort of quality we've come to expect from anything made in China. After the 3rd shot the cylinder falls out; the slider under the barrel usually winds up out in front about 10 feet; cocked it will go off if pointed to the ground (there were powder burns on my shoe the first time I discovered this). Junk, pure and simple. Looks nice though, so it's in a quick-draw rig and hung from a peg with my $225 Stetson in the gun room as decoration. I'm not all that into the cowboy thing but I had to find something useful to do with the pistol, and the hat which otherwise would remain in its box in the closet.
__________________
Despite the cost of living, have you noticed how popular it remains?
Uncle Billy is offline  
Old December 5, 2012, 08:07 AM   #4
Hal
Senior Member
 
Join Date: October 9, 1998
Location: Ohio USA
Posts: 7,445
The worst - was my first!
LOL! Didn't mean that as a rhyme.

FIE Titan .25.
Traded it on a Ruger .22 Mark I.

That Ruger may well have been the 2nd worst.
I got rid of that too.

Both were jamm-o-matics and didn't hit anywhere near where they were supposed to. Plus the FIE was just downright too expensive to shoot.
Hal is offline  
Old December 5, 2012, 09:14 AM   #5
TeamTurpin
Member
 
Join Date: November 28, 2012
Location: Guthrie, OK
Posts: 31
Raven Arms .25. Maybe not my best firearm purchase.
__________________
umop apisdn wI
TeamTurpin is offline  
Old December 5, 2012, 09:22 AM   #6
Rifleman1776
Senior Member
 
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
Worst ever by far: Marlin lever rifle in .44 mag. Back to factory twice, never worked right. Couldn't find paper at 25 yards.
Current junker: Jennings .22lr semi-auto pocket pistol.
Rifleman1776 is offline  
Old December 5, 2012, 09:23 AM   #7
Zhillsauditor
Senior Member
 
Join Date: October 19, 2008
Posts: 635
Ruger 10/22--the magazine would fall out every third shot--sold at a loss with full disclosure.

Tokarov TT, safety would engage every few rounds. Traded it on a malfunctioning Buckmark that, with a new recoil spring and pad, was a sweet shooter that functioned flawlessly.

I would say that I probably disliked my first gun the most, a Ruger MkIII 22/45, but it wasn't my worst.

Worst gun I currently own . . . a non-functioning 100 year old Marlin 1898 shotgun, that I intend to fix and reblue at some point. Overpriced at $50, I see it as a project to keep me busy.
Zhillsauditor is offline  
Old December 5, 2012, 09:25 AM   #8
loose_holster_dan
Senior Member
 
Join Date: April 5, 2011
Location: NE Ohio
Posts: 2,434
taurus 24/7 pro compact
closely followed by taurus 917c and kimber grand raptor 2.
__________________
Favorite range gun for the money - CZ 75B or STI Spartan V 9mm
Go-to carry setup - Walther PPS or PPQ in FIST kydex holster 1AK
Favorite semi-auto design - HK P7
"A Sig is like a lightsaber - not as clumsy or random as a Glock."
loose_holster_dan is offline  
Old December 5, 2012, 09:42 AM   #9
highpower3006
Senior Member
 
Join Date: July 30, 2011
Location: Reno NV
Posts: 448
I've owned so many junkers over the years it is hard to pick out the very worst. A couple that come to mind are a Raven .25 auto (what was I thinking!) and a 1939 660 coded K98k Mauser that would keyhole at 50 yards and was ugly to boot.

Some were just really disappointing, like the S42 Luger that I had that would not feed one round in a row with out jamming.
highpower3006 is offline  
Old December 5, 2012, 09:52 AM   #10
CurlyQ.Howard
Senior Member
 
Join Date: May 1, 2012
Posts: 280
Worst = 1187 - All three of them - worthless. And this after 25 years of successful use of an 870. Everything that the 870 was, the 1187 (each one of the three I owned) were not. Everything.
CurlyQ.Howard is offline  
Old December 5, 2012, 10:02 AM   #11
efield
Senior Member
 
Join Date: July 7, 2009
Location: Peoples Republik of Kalifornia
Posts: 122
I have a Ruby Izarra in .32ACP. I keep it as part of my historical collection. It's a Spanish made pistol contracted by the Finnish to be used as an officers sidearm. It looks a lot like a 1903 FN/Browning..................but it ain't no Browning. This "piece" is a jam-o-matic that will not put a 3 round pattern on a paper plate at 3 yards. I should fill the barrel with lead and use it as a paper weight or a decoy.
__________________
A man can never have too much red wine, too many books, or too much ammunition.
-Rudyard Kipling-
efield is offline  
Old December 5, 2012, 10:05 AM   #12
anothernewb
Senior Member
 
Join Date: August 7, 2012
Location: West Central MN
Posts: 114
Have a winchester 30-30 from the 60's that won't put 2 bullets within 4" of each other at 50' with the gun in a vice.
It's dinged, bent, pitted, crusty and absolutely not trusty.

However - it's a family heirloom with some interesting history behind it so it'll stay.

It still get's shot once or twice every few years just for the sake of it.
anothernewb is offline  
Old December 5, 2012, 10:08 AM   #13
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 9,548
RG 38 snub nose:

Can't really say I owned it, and I didn't keep it, I bought it to trade for my grandfather's 16 ga single barreled shot gun.

My aunt had my grandfathers shotgun. I wanted it.

When I was 8-10 I picked up pop bottles along the highway to come up with the 25 cents I needed for three shells and killed my first deer with that shotgun.

Years later, I was in highschool and asked my grandmother about the gun, she told me my aunt had it. Then she told me stories about the gun.

My grandfather pretty much used it to feed his family during the depression. He worked part time for the sheriff's dept, escourting prisoners from Perryville to Little Rock by wagon. The shot gun was his only weapon.

They lived on the Perry-Polaski county line, and grandpa stopped at the house to get some rest while on one such transport. While he napped grandma guarded the bandit. The bandit asked if she would really use that gun, she just said, "get out of that chair and see". He didn't.

Well since I've heard the stories and killed my first deer with that gun I had to have it. I asked my aunt and she said she needed it for protection (though she never fired it and I doubt she had any shells).

I told her I'd buy her a pistol which would be better for protection. After a bit she agreed. So I went to the hardware store and paid $29 for a piece of crap RG pot metal revolver and traded for the shotgun. (Back then, early 60s kids could buy guns).

So I had the thing for a few hours. Though it was junk, it was the best buy and trade I ever made. Still got my grandfather's shotgun but found out it was made for black power only. Don'tshoot it much but I still have it, and hope my grandkids will appriciate it some day.

Don't think my aunt every got any 38s for the gun, just as well, she was happy.

A little bit off topic, but that RG was the worse gun I ever bought.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School Oct '78
Distinguished Rifle Badge 1071
kraigwy is offline  
Old December 5, 2012, 10:09 AM   #14
traumajunkie
Member
 
Join Date: April 2, 2011
Location: Milton, WV
Posts: 15
My worst is my rem 770 still a good gun to pull out once a year to check zero and kill a deer but its the worst one in the gun cabinet and I won't get rid of it because my wife bought it for me a few Christmases ago


It's not an assault weapon it's a Modern Musket

Sent from my iPhone using Tapatalk
traumajunkie is offline  
Old December 5, 2012, 10:14 AM   #15
Woody55
Senior Member
 
Join Date: June 19, 2012
Location: East Texas
Posts: 407
I can't say I really owned it. I confiscated it from a family member. I don't even recall who made it.

It was a .25 ACP Saturday Night Special with an on board magazine. The only way to unload it was by cycling the magazine. The springs were very heavy, so unloading it was an adventure - espcially for the female family member I took it away from.

It also jammed about every other shot, which is how it came to my attention.

I had someone take a torch to it as a Service to Humanity.
Woody55 is offline  
Old December 5, 2012, 10:16 AM   #16
Esox
Member
 
Join Date: November 26, 2010
Posts: 42
Worst gun I ever owned that I bought used- Raven .25.
Worst gun I even owned that I bought new- Kimber Solo.

No, I no longer own either one. The Raven I sold to a buddy who 25 years later still uses it as a barn rat plinker. The Solo I sold to a friend who knew before hand how unreliable it was, it is now encased in a polyurethane block and is being used as a doorstop. The most appropriate use for that piece of crap.
Esox is offline  
Old December 5, 2012, 10:36 AM   #17
nate45
Senior Member
 
Join Date: July 15, 2007
Location: Illinois
Posts: 3,746
RG-14 22lr

I felt sorry for a guy that needed money back in the 80s. It would shoot okay, till either the linkage to the main spring, or hand, I can't remember exactly, would come undone and I'd have to fix it.

I've previously owned a couple of Taurus revolvers that had less that stellar QC on the finish, etc, but they never failed mechanically.


Other than those I can't think of anything. I've always researched firearms, carefully examined used ones, sometimes talked to other owners and stuck to quality brands. Since the internet got in full swing though, its too easy to find out which models and brands are causing problems. Not much excuse for being uninformed.
__________________
"No free man shall ever be debarred the use of arms."- Thomas Jefferson
ΜΟΛΩΝ ΛΑΒΕ
(>_<)
nate45 is offline  
Old December 5, 2012, 12:03 PM   #18
Rainbow Demon
Senior Member
 
Join Date: September 27, 2012
Posts: 397
A pawn shop owner gave me a .32 revolver with broken top strap that he said might be good for parts.
I hadn't seen this brand before so I figured I'd strip it to see how it was built.

The barrel used a liner so I took a stab at getting the liner out. I tried heating the barrel jacket to expand it and suddenly it all melted away like solder. I guess it was a low temperature ZAMAC casting.
Rainbow Demon is offline  
Old December 5, 2012, 12:10 PM   #19
RickB
Senior Member
 
Join Date: March 1, 2000
Location: Western WA
Posts: 5,854
Rohm RG66. I think I still have it, somewhere.
RickB is offline  
Old December 5, 2012, 12:19 PM   #20
armoredman
Senior Member
 
Join Date: May 22, 2007
Location: Arizona
Posts: 3,853
Tec-22, terrible pistol, refused to feed from any magazines but stock Ruger 10/22 mags, would still jam ever third round. Looked great, shot like a shotgun. I forget what I got for it when I sold it, but it was more than it was worth.
Century Arms built CETME - I got ONE magazine through it and it fell apart. Century said the warranty expired while the gun was sitting on the distributor's shelves. Found a tinkerer who wanted to try to fix it, almost made my money back.
__________________
http://czfirearms.us/ same original CZForum, new location.
armoredman is offline  
Old December 5, 2012, 03:04 PM   #21
Seaman
Senior Member
 
Join Date: February 20, 2011
Posts: 652
CZ-27

Beautiful pistol. Feels great in the hand. At 10 feet shoots a 6" group. And what's even better, it jams a lot. POS.

A real disappointment.
__________________
For 20 years the sea was my home, always recall the sun going down, and my trusty friend, a 1911 pistol, strapped to my side.
Seaman is offline  
Old December 5, 2012, 07:03 PM   #22
SIGSHR
Senior Member
 
Join Date: September 13, 2005
Posts: 3,167
Didn't care for my S&W M-59, between that and firing a Colt Cobra (one of my "grail" guns) I realized I was a Steel and Walnut Man.
I have an Ortgies 25 ACO, to disassemble and reassemble, bought a spare slide for it, realized it would take a lot of fitting to make it work. But since it is a "having" gun rather than a "working" gun, I can live with it.
Myx CZ 27 is quite accurate, the ergonomics are poor, yes.
SIGSHR is offline  
Old December 5, 2012, 07:23 PM   #23
cornbush
Senior Member
 
Join Date: September 29, 2008
Location: The retarded place below Idaho
Posts: 1,390
Walther P22, it was so reliable I would have felt comfortable being disarmed and having it pointed at me by a perp...........
__________________
The best shot I ever made was an accident
cornbush is offline  
Old December 5, 2012, 07:44 PM   #24
johnwilliamson062
Senior Member
 
Join Date: May 16, 2008
Posts: 6,845
So far, Mossberg 930. Hasn't been back to the factory yet, but it is due for trip one as soon as I face up to the reality. Hopefully it comes back and I can change my answer.
__________________
$0 of an NRA membership goes to legislative action or court battles. Not a dime. Only money contributed to the NRA-ILA or NRA-PVF. You could just donate to the Second Amendment Foundation
First Shotgun Thread First Rifle Thread First Pistol Thread
johnwilliamson062 is offline  
Old December 5, 2012, 07:50 PM   #25
Brian48
Senior Member
 
Join Date: December 21, 2001
Location: Boston, People's Republic of MA
Posts: 1,371
I don't dislike any of the guns I currently have enough to say any of them is my "worst". I did own an AMT Hardballer at one time though. By far, the biggest hunk of junk I've ever wasted my money on.
__________________
Proud to have served.
Brian48 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.14528 seconds with 9 queries