The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools
Old January 21, 2013, 03:32 PM   #1
Senior Member
Join Date: January 26, 2009
Posts: 654
Remington shotgun M1894

Does anyone have a diagram and parts list for this old shotgun? Also will need a stock, any idea where to find one?
dlb435 is offline  
Old January 21, 2013, 05:45 PM   #2
Senior Member
Join Date: September 19, 2008
Posts: 4,679


Stocks would have to be custom made & fitted.

PetahW is offline  
Old January 21, 2013, 07:25 PM   #3
James K
Join Date: March 17, 1999
Posts: 21,793
Unlike many old doubles which have little value, if that Remington is in good condition, it should be worth having a stock made. But even if the barrels are solid steel, and the gun checks out OK, I would recommend against firing it except with low pressure loads or black powder.

Jim K
James K is online now  
Old January 23, 2013, 07:37 PM   #4
Senior Member
Join Date: January 26, 2009
Posts: 654
Thanks for the breakdown, this old gun is missing a lot of parts and has a bad stock. I think it's going to remain a display peice.
Thanks for the info.
Those Damascus steel barrels do look nice. Too bad it will never fire again.
dlb435 is offline  

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:38 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05358 seconds with 9 queries