Birchwood Casey Bore Scrubber a C&R Collectors BEST Friend

deerslayer303 · January 30, 2013, 09:24 PM

Hey Guys,
Just wanted to highly recommend Birchwood Casey's Bore Scrubber "GEL". This stuff is nothing but a can full of AWESOME. I've used it on MN's, and today on this NASTY No. 5's bore. The gunk in that poor guns barrel was horrible, at first I though the rifling was gone, but the lands were SLAM FULL of gunk. I took a rod with a loose fitting patch (.243 slot with .30 cal patch) and ran it from the breech and all the way out the muzzle. Then I shot the gel down the muzzle then took the patch and dragged the gel back through the barrel. I did this a few times to make sure the bore was coated with the gel. Wait 20 minutes. Then take a TIGHT fitting bore brush and run the bore 10 times or so. I then wash it out with brake cleaner. Run a few tight clean patches and BAM a MIRROR BRIGHT BORE. It does NASTY Nagant bores this good too. YOU GUYS HAVE GOT TO TRY IT!!! WARNING: DO NOT BREATH THE VAPORS IT WILL ABSOLUTELY TAKE YOUR BREATH AWAY!! This stuff cuts copper fouling like a hot knife through butter. The deerslayer303 product testing department gives it TWO THUMBS WAY UP!!!!!!

deerslayer303 · January 30, 2013, 10:04 PM

I should have said the lands were full of gunk at the breech and the first maybe 3 or so inches of the barrel.

TheDoubleDeuce · January 30, 2013, 10:46 PM

You mean the grooves were full of gunk, not the lands, right? =) Good info, thanks!

deerslayer303 · January 30, 2013, 10:51 PM

LOL yeah the grooves! I need to slow down on this here keyboard a tad or maybe proof read my posts! I've found this stuff at sportsmans warehouse. But since I've moved to TN I don't have a local source for it.

January 30, 2013, 09:24 PM	#1
deerslayer303 Senior Member Join Date: January 10, 2011 Location: McMinnville TN Posts: 1,116	Birchwood Casey Bore Scrubber a C&R Collectors BEST Friend Hey Guys, Just wanted to highly recommend Birchwood Casey's Bore Scrubber "GEL". This stuff is nothing but a can full of AWESOME. I've used it on MN's, and today on this NASTY No. 5's bore. The gunk in that poor guns barrel was horrible, at first I though the rifling was gone, but the lands were SLAM FULL of gunk. I took a rod with a loose fitting patch (.243 slot with .30 cal patch) and ran it from the breech and all the way out the muzzle. Then I shot the gel down the muzzle then took the patch and dragged the gel back through the barrel. I did this a few times to make sure the bore was coated with the gel. Wait 20 minutes. Then take a TIGHT fitting bore brush and run the bore 10 times or so. I then wash it out with brake cleaner. Run a few tight clean patches and BAM a MIRROR BRIGHT BORE. It does NASTY Nagant bores this good too. YOU GUYS HAVE GOT TO TRY IT!!! WARNING: DO NOT BREATH THE VAPORS IT WILL ABSOLUTELY TAKE YOUR BREATH AWAY!! This stuff cuts copper fouling like a hot knife through butter. The deerslayer303 product testing department gives it TWO THUMBS WAY UP!!!!!! __________________ "You're so drunk you cant hit nothin, In fact you're probably seeing double"...."I have TWO GUNS one for each of ya"

January 30, 2013, 10:04 PM	#2
deerslayer303 Senior Member Join Date: January 10, 2011 Location: McMinnville TN Posts: 1,116	I should have said the lands were full of gunk at the breech and the first maybe 3 or so inches of the barrel. __________________ "You're so drunk you cant hit nothin, In fact you're probably seeing double"...."I have TWO GUNS one for each of ya"

January 30, 2013, 10:51 PM	#4
deerslayer303 Senior Member Join Date: January 10, 2011 Location: McMinnville TN Posts: 1,116	LOL yeah the grooves! I need to slow down on this here keyboard a tad or maybe proof read my posts! I've found this stuff at sportsmans warehouse. But since I've moved to TN I don't have a local source for it. __________________ "You're so drunk you cant hit nothin, In fact you're probably seeing double"...."I have TWO GUNS one for each of ya"

January 30, 2013, 10:46 PM	#3
TheDoubleDeuce Member Join Date: January 8, 2013 Posts: 88	You mean the grooves were full of gunk, not the lands, right? =) Good info, thanks!