The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Competition Shooting

Reply
 
Thread Tools
Old January 14, 2013, 07:40 PM   #1
rhawk0451
Junior Member
 
Join Date: January 14, 2013
Location: North Carolina
Posts: 2
At what range should I zero my new 22 rifle

Hi, I’m a new member to this forum and this is my first post. I've noticed a great deal of knowledge and appreciate how it's shared. Well, I have a burning question and could really use some help. If it turns out this question has been kicked around before, I apologize in advance.

I’ve recently purchased a new Savage Mk2 TR rifle and a Mueller 8-32x44 target type scope. I want to use this set up as a trainer in hopes of becoming a better marksman down the road. I also wanted a scope with exposed turrets to better my understanding of MOA and making the proper sight adjustments on the fly and when needed. I've read in the spec sheet where this scope has a total of 40 inches of vertical adjustment. I'm assuming this means 20 inches above center and 20" below at best. Thus the reason for my title / question. So with that said, at what range should this scope be zeroed to get the most out of my limited amount of elevation so I can shoot at the longest possible ranges without a hold over. I hope you can make sense of my question.

Your help in this matter would be greatly appreciated.
rhawk0451 is offline  
Old January 14, 2013, 08:16 PM   #2
Daggitt
Senior Member
 
Join Date: March 11, 2011
Posts: 321
What distance are you planning on shooting from?
Daggitt is offline  
Old January 14, 2013, 09:08 PM   #3
rhawk0451
Junior Member
 
Join Date: January 14, 2013
Location: North Carolina
Posts: 2
I'd like to shoot out to 200 yards and as close as 25.
rhawk0451 is offline  
Old January 14, 2013, 09:47 PM   #4
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 11,011
Shoot at 25 yards. Zero the scope, write down the adjustment settings.
Repeat at all ranges of interest.

When you set up on a target at one of those ranges of interest, look at your chart and make the appropriate sight setting.

If your scope has mil dots or other range estimating and compensating reticle features, log what they are good for.

A .22 has a pretty high trajectory. Your window of ranges at which you can shoot without adjustment or holdover is narrow, and gets narrower as the range gets longer.
Jim Watson is online now  
Old January 14, 2013, 10:18 PM   #5
Edward429451
Junior member
 
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
I always zero for 50 yards with 22s. I always use iron sights though. I did have occasion to shoot at 315 yards at a steel man target though. A couple shots to determine holdover is all it took and then I was hitting it everytime. It didn't seem to take a whole heck of a lot of holdover, but I was shooting downhill and I'm sure that helped it.
Edward429451 is offline  
Old January 14, 2013, 10:51 PM   #6
elDiabloLoco
Member
 
Join Date: December 18, 2012
Location: USA
Posts: 77
Yards or feet? Scope?

This has a ballistics table that sounds right for yards(1050fps and 40gr). Pretty big drop on a 22LR at 200 yards. 200 FEET.....not so much.
http://www.6mmbr.com/rimfiretactical.html

I have a marlin, with the iron sights 200 feet would be possible. At 200 yards I'll never see the target. At 200 yards I'd want a longer barrel and a scope, and still expect the wind to blow that 40gr slug off even if I got the elevation correct.

No?
elDiabloLoco is offline  
Old January 14, 2013, 10:55 PM   #7
elDiabloLoco
Member
 
Join Date: December 18, 2012
Location: USA
Posts: 77
Sorry.....re-read the original.

Still - 200 yards might be outside the range of your scope. Be fun to take out and play with to find out.
elDiabloLoco is offline  
Old January 15, 2013, 04:29 PM   #8
g.willikers
Senior Member
 
Join Date: September 28, 2008
Posts: 5,048
How about just choosing one distance for the scope adjustment and use the dots or marks in the viewfinder and hold over / under for all other distances.
It takes a little trial and error to find these, but once done, it keeps messing with the scope to a minimum.
It doesn't matter all that much what distance is chosen for the scope setting, as long as the crosshair, 'etc, is pretty much centered and easy to find.
You won't have to be as concerned with running out of scope adjustment with this method, either.
__________________
Lock the doors, they're coming in the windows.
g.willikers is offline  
Old January 15, 2013, 05:28 PM   #9
Old Grump
Member in memoriam
 
Join Date: April 9, 2009
Location: Blue River Wisconsin, in
Posts: 3,144
50 yard zero will put your shots close enough at 25 yards you won't have to worry about readjusting. Depending on ammo you are only talking 4" difference at 100 yards. You won't have nay problems getting on target at 200 yards. Don't over think it, just get some good ammo and start shooting.
__________________
Good intentions will always be pleaded for any assumption of power. The Constitution was made to guard the people against the dangers of good intentions. There are men in all ages who mean to govern will, but they mean to govern. They promise to be good masters, but they mean to be masters.
--Daniel Webster--
Old Grump is offline  
Old January 17, 2013, 09:05 PM   #10
BoogieMan
Senior Member
 
Join Date: April 4, 2012
Location: South Jersey
Posts: 1,274
It really depends what range you want to shoot IMO. As others said .22lr will drop considerable at distance. Most guys dont consider a .22lr a bullseye shooter beyond 100yds. Yes you can hit the target at 400yds but your not going to be hitting a 1/2" group. JMO but you may want to set at 50 yds and play with cartridges until you can consistently shoot under 1/2" 5shot groups. You may also want to check out rimfirecentral.com and look at the competitions that those guys are shooting. They always have forum comps going on. Many of those guys are shooting sub 1/4" groups at 50yds. Looks like a clover. I have a old Marlin that I did a little work on. With wolf ammo I can shoot 5/8" groups at 50yds fairly consistent. The skills you learn there can be moved out to any range with the right caliber.
I hope this helps. The guys at rimfire central are almost as helpful and friendly as the guys on firingline.
__________________
Concentrated power is not rendered harmless by the good intentions of those who create it.
Milton Freidman
BoogieMan is offline  
Old February 12, 2013, 04:38 PM   #11
Lark
Senior Member
 
Join Date: November 28, 2012
Location: Western WA
Posts: 117
I zeroed my Savage MKii at 100 yards. With a mil-dot 4-12x scope I hold under 3 mils for 25 yards, about 2 mils high for 150 yards and 5 mils high for 200 yards. The 40 grain subsonic ammo (I shoot it suppressed) in a 1-16 twist barrel is good for 1.5 inches at 100 yards but goes to a crappy 6-8 inches at 200 yards.

Can't go wrong with a scope that has multiple aiming points. This way I set the scope once and just hold under or over to hit the targets I want.

lark
__________________
Lark is free!
Lark is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:34 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.11382 seconds with 9 queries