The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 15, 2013, 10:51 PM   #1
dj_28
Member
 
Join Date: May 30, 2012
Posts: 26
DPMS AR with feeding issue

This AR is in 5.56 and when shooting .223 ammo through it, it hangs about every third shot. Would that be do to lower pressures in the .223 or does the gun have problems? I haven't fired 5.56 ammo in this gun yet (can't find any local yet).

DJ
dj_28 is offline  
Old January 16, 2013, 02:16 AM   #2
Wyosmith
Senior Member
 
Join Date: December 29, 2010
Location: Shoshoni Wyoming
Posts: 1,154
Check the 2 screws on the gas key (the dog-legged thing on to of the Bolt carrier)
The must be very tight and staked in place to stay that way. If they are a bit loose the gun will malfunction as you describe.
Wyosmith is online now  
Old January 16, 2013, 02:18 AM   #3
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,407
Beat me to it!
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old January 24, 2013, 10:14 PM   #4
kilotanker22
Senior Member
 
Join Date: October 14, 2012
Posts: 405
I don't think pressure is the issue. What the last two said seems like a good culprit.

However. I must ask if you lube the bolt carrier and the upper received. If so don't for a free hundred rounds. Leave a it dry. And fire a few hundred through it. After a time it will become polished by the force of the action and feed more reliably.

At least that was my experience in Afghanistan. Deployed with a brand new colt m4. Once you fire a few hundred rounds bone dry and make sure every thing on the fire arm is peachy it will function without fail.

Another problem could be the magazine.
kilotanker22 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06602 seconds with 9 queries