Ruger 10/22 ITAC

wpcexpert · August 18, 2012, 02:21 PM

Just picked up a Ruger 10/22 ITAC. Haven't fired it yet, opened the box looking at all the stuff. I found something in one of the bags that I can't ID.

It is a double cylinder looking thing, almost like a bore guide you would slip over the end of an automatic rifle. What is it???

I'll post pics and a range report after I Shoot the crap out of it...

wpcexpert · August 18, 2012, 08:14 PM

Well, I'll say that it shot better than I hoped for. I ran about 250 rounds thru her. I had a couple hang ups, but I figure with a good cleaning, it will do just fine. I like the way it handles.

I got the True Glow sighted in. At 50 yds, and the dot covering up the bullseye, the gun was shooting about a 2.5 in, 10 shot group. I bet I can do better with some good irons.

The rifle shot and cycled Remingtons better than the bulk Federals that I had. Those are the only two that I testd it with. But I'm very happy with the rifle.

Also, the barrel is threaded. All ready for the suppressor that is in the near future.

wpcexpert · August 18, 2012, 08:16 PM

Does no one know what exactly the thing is in the top pictures?

I think its a muzzle bore guide for the large bull barrels but I don't know why it was in my box.

TDiddy81 · January 4, 2013, 09:08 AM

I know this is an old thread, but if you haven't figured out what that is a picture of yet, It is to extend the but end of the stock.

idahonick · January 30, 2013, 06:36 PM

This is an adapter used to drop the stock for a lower sighting plane.

August 18, 2012, 02:21 PM	#1
wpcexpert Senior Member Join Date: February 29, 2008 Location: Central Arkansas Posts: 789	Ruger 10/22 ITAC Just picked up a Ruger 10/22 ITAC. Haven't fired it yet, opened the box looking at all the stuff. I found something in one of the bags that I can't ID. It is a double cylinder looking thing, almost like a bore guide you would slip over the end of an automatic rifle. What is it??? I'll post pics and a range report after I Shoot the crap out of it... __________________ When once a republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil. - Thomas Jefferson Last edited by wpcexpert; August 18, 2012 at 07:38 PM.

August 18, 2012, 08:14 PM	#2
wpcexpert Senior Member Join Date: February 29, 2008 Location: Central Arkansas Posts: 789	Off the Range Well, I'll say that it shot better than I hoped for. I ran about 250 rounds thru her. I had a couple hang ups, but I figure with a good cleaning, it will do just fine. I like the way it handles. I got the True Glow sighted in. At 50 yds, and the dot covering up the bullseye, the gun was shooting about a 2.5 in, 10 shot group. I bet I can do better with some good irons. The rifle shot and cycled Remingtons better than the bulk Federals that I had. Those are the only two that I testd it with. But I'm very happy with the rifle. Also, the barrel is threaded. All ready for the suppressor that is in the near future. __________________ When once a republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil. - Thomas Jefferson

August 18, 2012, 08:16 PM	#3
wpcexpert Senior Member Join Date: February 29, 2008 Location: Central Arkansas Posts: 789	Nobody Knows? Does no one know what exactly the thing is in the top pictures? I think its a muzzle bore guide for the large bull barrels but I don't know why it was in my box. __________________ When once a republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil. - Thomas Jefferson

January 30, 2013, 06:36 PM	#5
idahonick Junior Member Join Date: January 30, 2013 Posts: 1	Adapter used to drop the stock This is an adapter used to drop the stock for a lower sighting plane.

January 4, 2013, 09:08 AM	#4
TDiddy81 Junior Member Join Date: January 4, 2013 Posts: 1	I know this is an old thread, but if you haven't figured out what that is a picture of yet, It is to extend the but end of the stock.