The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: General

Reply
 
Thread Tools
Old January 24, 2013, 09:54 PM   #26
Texas Range Ammo
Member
 
Join Date: January 23, 2013
Location: North Central Texas
Posts: 18
Reading what ?

after looking at your question, and all the replies.

The replies are great.

My question is ? What ? are you or were you reading ???

the internet ?

Generally speaking,,, there are great books available to explain answers to such questions,, but wikipedia and the internet can be lacking on accurate firearms related info.
Texas Range Ammo is offline  
Old January 24, 2013, 10:49 PM   #27
teeroux
Senior Member
 
Join Date: December 12, 2006
Posts: 1,491
Quote:
Does this mean that .30 Caliber, 30-30, and 30-06 are all .308" rounds fired out of different casings for different purposes?
When 30-30 was developed it still used the black powder system for designation. 30cal bullet on 30gr of powder, but smokless instead of black. 30-06 designation comes from 30cal bullet developed in 1906.

Both utilize a .308in bullet. The 30-30 uses blunt tip bullets,traditionally, and rimmed cases due to tubular magazines. The 30-06 uses a spitzer bullet (pointy tip) and rimless case because it was developed for range, accuracy, and function for bolt action rifles.
teeroux is offline  
Old January 27, 2013, 05:18 PM   #28
44 AMP
Staff
 
Join Date: March 11, 2006
Location: Upper US
Posts: 11,134
Early in WWII, our War Dept. had an uncharacteristic moment of insight. They realised that:
1) there were a lot of guys who were not front line combat troops.
2) these guys did need to be armed. Traditionally this meant the 1911A1 pistol, rather than a combat rifle.
3) They were not going to have the time, nor the ability to make most of these guys decent pistol shots.
4) a light carbine, with neither the power nor the range of the main combat rifle would fill the bill, giving supply and support troops something that they could actually use effectively at short ranges, on those rare occassions when they needed to.

The result was the M1 .30 caliber carbine. It was never intended to be a combat rifle, however, when the combat troops got their hands on them, and found a rifle that only weighed about 2/3 what the M1 Garand did, held 15 shots, as opposed to the 5 of the Springfield, or 8 of the Garand, and performed tollerably well at close ranges where most of their combat was happening anyway, they used everyone that they could get their hands on.
Lighter and more range than the Tommygun, too, if not the knockdown power...

later 30 rnd mags just made the carbine even better.

The .30 Carbine round is approximately equal to the .357 Magnum pistol round, except that it cannot be used with heavier bullets than the 110gr standard. From a sporting perspective, the .357 in a carbine is more effective, but the carbine round, with soft point bullets will suffice for deer at close range. Compared to other ".30 caliber" rounds the .30 Carbine is the least powerful, and not as good a choice for hunting, for a variety of other reasons as well.

The only thing the carbine round has in common with the .30-30 or the .30-06 is the diameter of the bullets. Bullet length, weight, and velocity is much greater with the larger .30 caliber rounds.

The .380ACP (9mm Kurz) the 9mm Luger, and the 9x21, 9x23, 9mm Largo, 9mm Glisenti, (and some others not mentioned) all use the same 9mm diameter bullets, but the different size cases deliver them at different speeds. The .38 Special and .357 Magnum use .35 cal bullets (.358 vs the .355" for 9mms), but again, case size and pressures deliver vastly differing results.

Other than a single model of the Ruger Blackhawk, and single shot barrels for Contenders (and a single long defunct attempt at a semi auto) and the slightly successful Automag III auto pistol (also now long gone), nobody has ever put the .30 carbine round into any gun design that wasn't a variation of the M1 Carbine design. Its a nice piece of history, great fun to shoot, and does have some limited practical uses, but its not a general use rifle, and was never meant to be.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is online now  
Old February 1, 2013, 01:51 PM   #29
terzmo
Member
 
Join Date: December 16, 2012
Posts: 59
30/30 is a good brush gun....closer ranges than a 30.06. 30.06 is a reach out and "touch" somthing type caliber...can accomodate a heavier weight bullet than a 30/30 and has far more velocity grain for grain
terzmo is offline  
Old February 1, 2013, 08:49 PM   #30
Biff Tannen
Senior Member
 
Join Date: December 15, 2010
Location: Hill Valley
Posts: 256
44 AMP:
Your reply is amazing, and thanks for taking the time!
There is a paradox to seeking knowledge... When one lacks knowledge, they cannot recognize what is valuable to learn, because they don't know it.
You definitely shared the wisdom I was seeking, and it will enable me to seek further information optimally.
Thank you much!
__________________
- BIFF TANNEN -
The great-grandson of Buford "Mad Dog" Tannen.
Biff Tannen is offline  
Old February 2, 2013, 01:50 PM   #31
44 AMP
Staff
 
Join Date: March 11, 2006
Location: Upper US
Posts: 11,134
You are welcome, Biff. When you help with anything else, just ask. Lots of good people on the forum, with a vast range of experience. And glad to give you way more information (usually) than you need!
__________________
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is online now  
Old February 7, 2013, 04:13 AM   #32
alaskabushman
Member
 
Join Date: January 3, 2013
Location: S.E. Alaska
Posts: 84
I didnt read all the replies so someone may have already said this.
A "caliber" is 1/100th of an inch and is a unit of measurement. so a .25 caliber bullet is 1/4 of an inch and a .50 caliber bullet is 1/2 of an inch and a 1.00 caliber would be one inch. However calibers in cartridge NAMES are usually rounded like the .38 Special actually uses a .357 diameter (caliber) bullet. "30 caliber" generally means a cartridge plugged with .308 caliber bullet. Whether it be a .300 Weatherby or a .30 carbine .308 is usually the ACTUAL bullet diameter. Almost all calibers are rounded to some extent, like .270 Winchester is actually .277. .260 Remington is actually .264. Some are more truthful like the .284 Winchester or the .500 S&W. I saw some good replies on the history and origin of both the 30-06 and .30 carbine so I'll not delve into that. I sure hope this doesnt make things more complicated! Welcome to the rifle world.
alaskabushman is offline  
Old February 20, 2013, 06:43 PM   #33
brinker
Member
 
Join Date: January 12, 2013
Location: Texas
Posts: 38
new rifle man

all the information was right on. but the most important is knowing what round is used in that rifle. the different grain sizes are the weight of the bullet, and it can differ by the propellent used in the round. the modern bullets you buy in 20 round packages by law will have the velocity the round is traveling at different yards. The military surplus rounds will come packaged differently, maybe 48 round box or a clothbandolier. usually the date of manufacturer will appear next to the primer. and packaging some will have corrosive on the box. If you shoot it wash your barrel with a mixture of dawn/alcohaul/ water soapy patch. I run the patch several times changing with a fresh patch each time. dry it with a patch run hoppies and a oil patch to store. I just say this due to the M-1 you mentioned. I think you will like your rifle be safe and shoot clean Sunny
brinker is offline  
Old February 22, 2013, 04:58 PM   #34
Meeteetse
Member
 
Join Date: January 1, 2012
Location: Wyoming - Texas
Posts: 66
All or most of the information given is very good, but there is another way to look at it. The M1 .30 Carbine was supposed to replace the .45acp handgun in WWII, but it never did. I have always thought of the .30 Carbine as being a handgun load in a small rifle, sort of like shooting .357 mag in a levergun. The .30 Carbine should not be viewed as a deer rifle, although I am sure it has taken deer, but rather a general purpose personal defense, plinking and varmint gun. Lots of fun on coyotes, especially with a 30 rnd. mag.
__________________
All it takes for tyranny to succeed is for good men to do nothing.
Meeteetse is offline  
Old February 22, 2013, 10:10 PM   #35
darkgael
Senior Member
 
Join Date: February 9, 2006
Location: Homes in Brooklyn, NY and in Pennsylvania.
Posts: 4,270
Caliber

Quote:
Ok, I've recently inherited an M-1 30 Caliber...
Being a handgun guy, and never had a rifle before, I've done hours of research to find out how the .30 Caliber round relates to 30-30 and 30-06.
Kinda happy to see that a number of you dealt with the often abused "Caliber".
Too often we see that word used when "cartridge" is what is meant.
.30 caliber rounds....A quick check in Cartridges of the World shows at least 40 different cartridges all of which are .30 caliber rounds. (Not even counting the wildcats developed by Elgin Gates).
Pete
__________________
"Only hunting and mountain climbing are sports. The rest are just games." - R.Ruark
NRA Life Member
darkgael is offline  
Old February 23, 2013, 10:55 AM   #36
Jack O'Conner
Senior Member
 
Join Date: July 11, 2005
Location: Lancaster County, Pennsylvania
Posts: 1,457
You can kill anything with a 30-30 out to approx 150 yards or so with plain factory ammo. Need more reach? A larger case cartridge will do the job nicely. Many to choose from and they all do the job.

Jack
__________________
Fire up the grill! Deer hunting IS NOT catch and release.
Jack O'Conner is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09863 seconds with 7 queries