The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools
Old January 23, 2013, 06:22 PM   #1
rustyshoe
Junior Member
 
Join Date: January 19, 2013
Posts: 5
super black hawk

The pin that holds the cylinder in place, backs out after a couple of rounds, took it to a smith, no better, whats next ??
rustyshoe is offline  
Old January 23, 2013, 06:55 PM   #2
Tatume
Junior Member
 
Join Date: January 20, 2013
Location: Gloucester, Va.
Posts: 9
Install a Belt Mountain locking base pin. They are available from Brownells, among other places. It is a drop in replacement with one exception. You must remove the locking set screw, and using a drill press and a jig (you can make your own from wood and clamps) drill a shallow depression in the underside of the barrel. That will give the set screw a place to go. It is really very easy. Don't drill deep, just a tiny depression.
Tatume is offline  
Old January 23, 2013, 10:32 PM   #3
FrankenMauser
Senior Member
 
Join Date: August 25, 2008
Location: 1B ID
Posts: 6,738
Tell the 'smith you want your money back, or have them send it to Ruger.
__________________
"Such is the strange way that man works -- first he virtually destroys a species and then does everything in his power to restore it."
FrankenMauser is offline  
Old January 23, 2013, 11:00 PM   #4
ChiefTJS
Member
 
Join Date: June 25, 2009
Location: Omaha, Nebraska
Posts: 52
You can also install a heavier latch spring.
ChiefTJS is offline  
Old January 24, 2013, 12:17 AM   #5
oldgunsmith
Senior Member
 
Join Date: January 9, 2013
Posts: 278
I've always kept an eye on the bearing surface around the underside of the screw head. The older & blinder you get the more magnification helps. It usually gets to looking pretty beat up visibly before it starts letting the base pin get by. I have several old models and always keep a couple of spare latch ass'ys around. Being sure to keep it tight helps. When the notch (or groove) on the base pin starts looking beat up it gets replaced as well. The 41's & .44's seem to be the worst offenders, but .357 can do it, too.
oldgunsmith is offline  
Old January 24, 2013, 01:37 AM   #6
Pathfinder45
Senior Member
 
Join Date: January 7, 2008
Posts: 915
No Big Deal........

My .45 Colt Vaquero did the same thing when it was new. I took the cylinder pin out and used a small chainsaw file to file the locking groove just a little deeper. End of problem. Many thousands of rounds later it has never recurred.
Pathfinder45 is offline  
Old January 24, 2013, 09:02 PM   #7
GeauxTide
Senior Member
 
Join Date: April 20, 2009
Location: Helena, AL
Posts: 3,067
I have Belt Mountain Base pins in my six Blackhawks. They are cheap and they work.
GeauxTide is offline  
Old January 24, 2013, 10:33 PM   #8
Northrider
Senior Member
 
Join Date: February 22, 2011
Location: Wasilla, Alaska
Posts: 153
I had the same issue with mine. Tried replacing the pin and spring both but it still kept coming out. Ended up sending it to Ruger. Three weeks later it was back, perfect. Works like a charm. No charge at all.
Northrider is offline  
Old January 24, 2013, 11:34 PM   #9
481
Senior Member
 
Join Date: April 18, 2011
Posts: 469
One of the two SBHs I have was also like that. Ruger took good care of me and I got the gun back about a month and a half later. No problems as of six years later.
__________________
My favorite "gun" book -

QUANTITATIVE AMMUNITION SELECTION
481 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09317 seconds with 9 queries