The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools Search this Thread
Old February 5, 2013, 06:53 AM   #1
Join Date: July 24, 2010
Posts: 38

I have a Browning BLR that has a few scratches on the stock in the gloss finish. The scratches are shallow and in the finish only. How would I go about removing them?
was123 is offline  
Old February 5, 2013, 12:30 PM   #2
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 6,269
Plastic Polish

I have removed most of the light scratches by using a plastic polish. I have used Novus#2 but home depot or Menards, sells a plastic polish to be used on sink or vanity tops. Start out lightly and avoid any shart or pointed areas.
You will find that there will always be some that you will not be able to remove completely. That Browning finish is always bright and shiney but won't last long. ...

By the way, I also had to do this on my BLR, .22 ....

Be Safe !!!
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing.
Pahoo is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 11:53 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.10672 seconds with 9 queries