The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools
Old January 13, 2013, 10:29 AM   #1
tim_pattillo
Junior Member
 
Join Date: January 13, 2013
Posts: 2
1946 fabrica nacional de armas mexico DF

gm all, does any body know any thing about these riffles, i have found several postings about this riffle and those that have pics are different then the one that i have. please if any body can tell me what it is and what it might be worth would really help me out.
tim_pattillo is offline  
Old January 13, 2013, 09:05 PM   #2
raisitup
Member
 
Join Date: January 2, 2010
Location: Orlando, FL
Posts: 56
Sounds pretty interesting, my wife's from Mexico, might have to look into something like this.....

From http://www.archivingindustry.com/Mil...nary-intro.pdf

Mexico. A distinctive mark of an eagle with a snake in its beak, perched on a cactus on an island in a lake, has been used on military firearms for many years. The device is usually enwreathed in oak and laurel. Marks on guns imported into Mexico generally take the form of an heraldic displayed eagle, and often also bear REPÚBLICA MEXICANA; indigenous products use a less formal mark, more traditionally Aztec, accompanied by FÁBRICA NACIONAL DE ARMAS – MEXICO D.F. Weapons used by Mexican insurgents may bear a Phyrgian Cap on a sunburst, accompanied by ‘R’ and ‘M’ or ‘R de M’. Inscriptions will be in Spanish.
raisitup is offline  
Old January 13, 2013, 09:33 PM   #3
hogdogs
Staff In Memoriam
 
Join Date: October 31, 2007
Location: Western Florida panhandle
Posts: 11,069
Moving to a more suited forum for better response...

Brent
hogdogs is offline  
Old January 13, 2013, 11:15 PM   #4
Huffmanite
Senior Member
 
Join Date: February 17, 2006
Location: Northeast of Houston, Tx
Posts: 259
OK, being your Mexican military rifle is made in 1946, I have to think you have a model 1936 Mexican rifle in 7x57 mauser. Mexico had used German made mausers for sometime and decided to make their own rifles in the 1930s. If your rifle's bolt has a knurled nob on its end that reminds you of one on a U.S. 1903 Springfield rifle, then it is a M1936. It is considered a small ring mauser, yet it has features found on a large ring 98 mause, such as the third locking bolt lug and etc. In short, its receiver/action is kinda unique and finding replacement parts for it is rather difficult. M1936 rifle was replaced with another made in Mexico design/made mauser in 1950s, so not that many of the m1936 rifles were produced.

However, the M1936 Mexican action was highly prized for building custom rifles at one time. Today, may pay over $400 for a decent 1936 mexican action. Got the $400 price from a recent inquiry on another internet gunsite a week or so ago. Have no idea what a good condition, still military, m1936 Mexican rifle would sell for. Suggest you post an inquirey on www.surplusrifleforum.com about your rifle. Gents at surplusrifle may give you a better answer than me.

Chuckle, I bought an excellent condition still military m1936 on an internet auction several years ago for $230. Auction company had it listed as a mystery mauser, cartridge unknown. Lucky for me, pics of rifle showed the knob on its bolt and since it is kinda a rare rifle, no one else monitoring the internet auction knew what it was, so I was about only one to bid on the rifle. Unfortunately, the Mexican crest had been removed from the receiver on mine, really hurting its collectors value.
Huffmanite is offline  
Old January 14, 2013, 05:41 AM   #5
HiBC
Senior Member
 
Join Date: November 13, 2006
Posts: 3,824
Came across a few Mex receivers long time ago.No bolts.TheYugo bolt can be used,but,as I recall(its been 20 years ago)the length was not quite right forward of the locking lugs.The bolt face comes up nearly to the barrel seat on the diaphram.A slight counterbore in the barrel shank is necessary to clear the locking lugs on the bolt,and an extractor notch must be cut in the barrel shank.I do not recommend it unless you understand how it all comes together.

Done right,it works quite well.I have an FN commercial bolt sleeve on mine,and Timney trigger with safety.

My .257 Ackley is built on that action.I've been shooting it 20 years.

The action I'm looking at says 1941

Last edited by HiBC; January 14, 2013 at 05:47 AM.
HiBC is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06890 seconds with 9 queries