The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Thread Tools Search this Thread
Old January 10, 2013, 10:04 PM   #1
Senior Member
Join Date: December 8, 2009
Location: The Peoples Republic of Massachusetts
Posts: 314
Remington SPR310 O/U

My first time out with new shotgun and am very pleased. My best score out of 3 rounds in singles was a 22. It took me the first two rounds to get my hold figured out. I have to cover the bird completely on the straight away targets.

I was wondering if I should put a riser on the stock or just leave it as is?
80viking is offline  
Old January 11, 2013, 02:25 PM   #2
Senior Member
Join Date: February 23, 2005
Posts: 11,879
Talk to some of your buddies at the gun club....and let them help you take it to a pattern check your point of impact .

Put in a Full choke at about 21 yds...( shoot at a 3" dot ) on the board...and see what your point of impact is.

If the gun isn't hitting where you look ( at the dot ) ....then a comb riser, or an adjustable butt pad or something may be in order.

But with a lot of guns - over the point of impact they tend to shoot a 50% / 50% on point of impact ...and that means you'll have to cover the target to break it. Now you might be able to adjust it the gun gives you a 70%/30% pattern ...and you can float the bird a little...

but none of us can tell you over the internet what to do need to go to the pattern board and check it.
BigJimP is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 03:52 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.13814 seconds with 7 queries